1986F150Six Posted November 7, 2019 Share Posted November 7, 2019 https://www.ebay.com/itm/NOS-1985-86-87-88-89-90-91-FORD-TRUCK-F-SERIES-BRONCO-5-0-5-8L-FAN-SHROUD/293318358504?hash=item444b22f5e8:g:LfUAAOSwfkpdxDUn Link to comment Share on other sites More sharing options...
Vic Roma Posted November 7, 2019 Share Posted November 7, 2019 Only for trucks with Standard/Extra cooling, and A/C. On that note, what’s the difference between Standard, Extra, and Super Cooling? I’m guessing it has something to do with towing capabilities and cooling the power steering / oil with steel lines looped on the TTB., etc. Is this right? Link to comment Share on other sites More sharing options...
Rembrant Posted November 8, 2019 Share Posted November 8, 2019 Only for trucks with Standard/Extra cooling, and A/C. On that note, what’s the difference between Standard, Extra, and Super Cooling? I’m guessing it has something to do with towing capabilities and cooling the power steering / oil with steel lines looped on the TTB., etc. Is this right? The radiators were different sizes depending on what the cooling options were. My truck, a 1984 bare bones stripper with no AC just had the small (narrowest) radiator...I think it's around 21" wide. If you had AC the radiator is about 6" wider making it more like 27". Heavy duty cooling I believe was even a little bit bigger than that...like 28-29" wide. Link to comment Share on other sites More sharing options...
Dyn Blin Posted November 8, 2019 Share Posted November 8, 2019 Only for trucks with Standard/Extra cooling, and A/C. On that note, what’s the difference between Standard, Extra, and Super Cooling? I’m guessing it has something to do with towing capabilities and cooling the power steering / oil with steel lines looped on the TTB., etc. Is this right? The radiators were different sizes depending on what the cooling options were. My truck, a 1984 bare bones stripper with no AC just had the small (narrowest) radiator...I think it's around 21" wide. If you had AC the radiator is about 6" wider making it more like 27". Heavy duty cooling I believe was even a little bit bigger than that...like 28-29" wide. that's a nice find. My '82 has no AC, but has the "Extra Cooling Package". I believe the shroud I have is not original (or if it is, it's been rigged to fit the current radiator). That's good information on the radiator widths, thank you. Link to comment Share on other sites More sharing options...
Rembrant Posted November 8, 2019 Share Posted November 8, 2019 that's a nice find. My '82 has no AC, but has the "Extra Cooling Package". I believe the shroud I have is not original (or if it is, it's been rigged to fit the current radiator). That's good information on the radiator widths, thank you. I've been watching for a replacement shroud for a while as mine has a bad crack in it. By this point and time, I think a lot of them are cracked and broken. Link to comment Share on other sites More sharing options...
Vic Roma Posted November 8, 2019 Share Posted November 8, 2019 that's a nice find. My '82 has no AC, but has the "Extra Cooling Package". I believe the shroud I have is not original (or if it is, it's been rigged to fit the current radiator). That's good information on the radiator widths, thank you. Here’s what the bible has to say about dimensions: Link to comment Share on other sites More sharing options...
Rembrant Posted November 8, 2019 Share Posted November 8, 2019 Here’s what the bible has to say about dimensions: Well that's interesting. Only the two different rads for the 302 between 1980-1984. Part of the "Extra Cooling" must have been for Auto Transmission, because my 21" "Standard Cooling" factory radiator did not have any ports in it for transmission fluid lines. My replacement radiator did have the trans ports, but my original Ford rad did not. Link to comment Share on other sites More sharing options...
reamer Posted November 9, 2019 Share Posted November 9, 2019 Here’s what the bible has to say about dimensions: Well that's interesting. Only the two different rads for the 302 between 1980-1984. Part of the "Extra Cooling" must have been for Auto Transmission, because my 21" "Standard Cooling" factory radiator did not have any ports in it for transmission fluid lines. My replacement radiator did have the trans ports, but my original Ford rad did not. there's that "Pony" option again... Link to comment Share on other sites More sharing options...
FuzzFace2 Posted November 10, 2019 Share Posted November 10, 2019 there's that "Pony" option again... And that list only shows 1 size radiator for the 300 six and I know between the 2 trucks I have 1 with AC the other w/o has 2 different sizes the AC being the bigger one. Dave ---- Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 10, 2019 Share Posted November 10, 2019 And that list only shows 1 size radiator for the 300 six and I know between the 2 trucks I have 1 with AC the other w/o has 2 different sizes the AC being the bigger one. Dave ---- Dave - I see three sizes for the shroud. Wouldn't that also mean different sizes for the radiators? What am I missing? 21 35/64 high by 27 37/64 wide 18 11/32 high by 26 31/32 wide 19 11/16 high by 28 27/64 wide Link to comment Share on other sites More sharing options...
Recommended Posts