ArdWrknTrk Posted October 22, 2017 Share Posted October 22, 2017 Bill, the radiator support bolts don't look too good. What other "hardware" do you want? My truck??? Lol. Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 22, 2017 Author Share Posted October 22, 2017 My truck???Lol. Wow! You picked it clean. 😉 On Sunday, October 22, 2017, ArdWrknTrk [via Bullnose Enthusiasts] <redacted_email_address> wrote: Link to comment Share on other sites More sharing options...
85lebaront2 Posted October 22, 2017 Share Posted October 22, 2017 Bill, the radiator support bolts don't look too good. What other "hardware" do you want? Not the bolts so much as the washers and shims so Gary can powder coat them and the extras I have so next time I take the doghouse off I can put them on. If you don't need them, the fuel lines or at least the front part of them and the engine lifting pad, supposedly there was one in front right and rear left as installed. Wiper motor for a spare (1995-96 are different). Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 22, 2017 Author Share Posted October 22, 2017 Not the bolts so much as the washers and shims so Gary can powder coat them and the extras I have so next time I take the doghouse off I can put them on. If you don't need them, the fuel lines or at least the front part of them and the engine lifting pad, supposedly there was one in front right and rear left as installed. Wiper motor for a spare (1995-96 are different). Jim - Stick Bill’s washers and shims in my shipment, please. Bill - I will put those in with some of my parts to blast and PC. What color do you want? Then I can include them with the tranny if we get that worked out. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted October 22, 2017 Share Posted October 22, 2017 Not the bolts so much as the washers and shims so Gary can powder coat them and the extras I have so next time I take the doghouse off I can put them on. If you don't need them, the fuel lines or at least the front part of them and the engine lifting pad, supposedly there was one in front right and rear left as installed. Wiper motor for a spare (1995-96 are different). Well, I'm done for the night. I just wrapped cardboard around the radiator and condenser. Everything is free, except Gary's upper cross member braces. Because I broke the 18mm short socket on the motor mounts. Bill, I'll try to get the shims and washers. And the wiper motor. (Mine is dead as of this morning) Why? IDK. I need to wrap this up because I'm taking a cutoff saw to it so it can scrap without a title (as *parts*) Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted October 22, 2017 Share Posted October 22, 2017 Not the bolts so much as the washers and shims so Gary can powder coat them and the extras I have so next time I take the doghouse off I can put them on. If you don't need them, the fuel lines or at least the front part of them and the engine lifting pad, supposedly there was one in front right and rear left as installed. Wiper motor for a spare (1995-96 are different). The fuel lines -back past the filter- are attached to Gary's manifold. I didn't pull the fuel rails or any sensors off. I didn't have the tool and didn't want to cut with my angle grinder, as I had it running a couple of days ago. I still ended up with a lap full of gas when I cut them at the back of the cab. I need to find my quick release tool or get another when I go to get a new socket. Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 22, 2017 Author Share Posted October 22, 2017 The fuel lines -back past the filter- are attached to Gary's manifold. I didn't pull the fuel rails or any sensors off. I didn't have the tool and didn't want to cut with my angle grinder, as I had it running a couple of days ago. I still ended up with a lap full of gas when I cut them at the back of the cab. I need to find my quick release tool or get another when I go to get a new socket. I can’t imagine how tired you are. I’m tired just seeing all you’ve done - as well as installing two sets of IKEA shelving systems, re-installing a pulled-out curtain rod, and tethering two of my granddaughter’s cabinets to the wall. Anyway, many thanks. 😉 Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted October 23, 2017 Share Posted October 23, 2017 I can’t imagine how tired you are. I’m tired just seeing all you’ve done - as well as installing two sets of IKEA shelving systems, re-installing a pulled-out curtain rod, and tethering two of my granddaughter’s cabinets to the wall. Anyway, many thanks. 😉 You're very welcome Gary. I'm glad to know that this truck's pieces are going to make other trucks better instead of being torn into little shreds by the big ugly machine. Link to comment Share on other sites More sharing options...
85lebaront2 Posted October 23, 2017 Share Posted October 23, 2017 Well, I'm done for the night. I just wrapped cardboard around the radiator and condenser. Everything is free, except Gary's upper cross member braces. Because I broke the 18mm short socket on the motor mounts. Bill, I'll try to get the shims and washers. And the wiper motor. (Mine is dead as of this morning) Why? IDK. I need to wrap this up because I'm taking a cutoff saw to it so it can scrap without a title (as *parts*) If you need the wiper motor, the service motor for 1987-9? is the later motor with an adapter harness. Link to comment Share on other sites More sharing options...
85lebaront2 Posted October 23, 2017 Share Posted October 23, 2017 Jim - Stick Bill’s washers and shims in my shipment, please. Bill - I will put those in with some of my parts to blast and PC. What color do you want? Then I can include them with the tranny if we get that worked out. Whatever the original Ford color was. Link to comment Share on other sites More sharing options...
Recommended Posts