Sideflop Posted August 28, 2019 Share Posted August 28, 2019 I know I've posted on my F250 once or twice here, but I haven't posted any photos of it apart. Starting off, the engine bay when I first got the truck. When I first got this, everything was leaking everywhere, so there was so much gunk that I couldn't really tell there was an engine under the hood. After that was the usual starting process of flushing the radiator, changing the thermostat, heater and radiator hoses, breaking the retractable hood light, etc. Once I got all that done, I changed the heater core and sidelined the truck while my dad and I started ordering the necessary gaskets, seals, and other things to stop the leaks in the fuel return lines, transmission, xfer case, power steering gearbox, and rear end. The first hangup of the project was when I pulled the valve covers off to find a couple of loose rockers and two pairs of rockers that had the old aluminum bridges on them... So that's an unplanned trip to eBay to find new rocker arms. Some of the old rockers and the two saddles were on their way to being totally wiped out, too. Now that the rockers and glow plugs are changed out, I started replacing the o-rings and return lines for the injectors, painting the injector lines before reinstalling them. Also got new headlight and wiper switches, and a new brake reservoir. A couple of weeks later, we got the truck moved to a friend's place with a shop and fixed the left rear brake. Next on the list was pulling the transfer case and transmission to change the seals in them. I enjoyed the project much more when I found the distance piece that attaches the transmission to the transfer case didn't have any of the ears broken off like they tend to be. Resealing and painting the transmission. After getting the transfer case and transmission redone, I pulled out the steering column to clean it and replace the turn signal switch. Blasted and painted the transmission mount before installing the transmission and xfer case. After that, the truck got put back together with a new throttle cable and some other odds and ends and I drove it around for about a week before taking the front apart, starting with getting some access to the leaky left exhaust manifold, oil cooler, and power steering gearbox. Of course, I painted the manifold and oil cooler. Put new oil seals in the steering gearbox and put that back in the truck. After that, I put an axle pivot bushing in. Turns out the bushings I got under Moog's name tapered near the end and kept going, so both tries didn't fit and I wound up finding some bushings from Energy Suspension that came with the metal shell, tapered slightly but returning to a flat angle, so the one dad and I tried putting in fit like a glove. Now, I got all this stuff in the front end done in less than a month so I could attend a truck meet in Argyle called the Farm Truck Show. I'm in the bald eagle shirt. Pretty decent progress considering what little experience I've had working on vehicles (I only got into the hobby in July of last year, with a 2001 Frontier). Since then, I got new headlights and seatbelts, and that's about it until I start rebuilding the front axle this weekend. In total, I started this project in Christmas 2018 and reached a stopping place for the big stuff by June 7 this year, with roughly $5200 invested in the truck, including buying and registering it. Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 28, 2019 Share Posted August 28, 2019 Wow!! That's an epic post! And lots and lots of work. Well done work at that. I'm impressed. You've gotten far more work done on your truck in that time than I have. Link to comment Share on other sites More sharing options...
Sideflop Posted August 28, 2019 Author Share Posted August 28, 2019 Wow!! That's an epic post! And lots and lots of work. Well done work at that. I'm impressed. You've gotten far more work done on your truck in that time than I have. Thanks! I couldn't have gotten this far without my dad's help. It helps a ton that he's been willing to give financial and research help so I can focus on college. Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 28, 2019 Share Posted August 28, 2019 Thanks! I couldn't have gotten this far without my dad's help. It helps a ton that he's been willing to give financial and research help so I can focus on college. That's great, a father/son project. I'm jealous! Link to comment Share on other sites More sharing options...
grumpin Posted August 28, 2019 Share Posted August 28, 2019 That's great, a father/son project. I'm jealous! Good job! Thought you found a nest of some sort, then realized it was your tranny! Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted August 28, 2019 Share Posted August 28, 2019 Good job! Thought you found a nest of some sort, then realized it was your tranny! Dane, I thought it incredible there was a T-19 somewhere under all that grease and grime. Sideflop, Thanks for sharing your introduction to the Bullnose trucks. I'm glad I can follow along. Link to comment Share on other sites More sharing options...
Sideflop Posted August 28, 2019 Author Share Posted August 28, 2019 Just got all the parts to rebuild the left side of the front axle, except for a spindle nut socket. The socket oughta show up this Friday so I can start this leg of the project and hopefully have the truck driving again before the end of next week. Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 29, 2019 Share Posted August 29, 2019 Just got all the parts to rebuild the left side of the front axle, except for a spindle nut socket. The socket oughta show up this Friday so I can start this leg of the project and hopefully have the truck driving again before the end of next week. Just the left side? Why not both? Link to comment Share on other sites More sharing options...
Sideflop Posted August 29, 2019 Author Share Posted August 29, 2019 Just the left side? Why not both? The right side is fine right now, but the left side's driveline has a bad u-joint and the bottom left ball joint is toast. I do plan on rebuilding the right side, but not right now. Link to comment Share on other sites More sharing options...
Ford F834 Posted August 30, 2019 Share Posted August 30, 2019 Welcome to the group! Thanks for sharing your project. I love the truck, particularly the engine type 😁. Link to comment Share on other sites More sharing options...
Recommended Posts