VWThomason Posted August 27, 2019 Share Posted August 27, 2019 Hello everyone! My name is Vincent and I'm from Arkansas. I've got a wide background of knowledge and skills, but I am here to learn more as well as help others along the way. I'm currently working on my 1986 F350 crew cab long bed dually 6.9 c6 2wd truck. This truck now has a 1997 215hp P-pump cummins engine in it, backed by a ZF-5 from a 1996 F350. I am also converting this truck to 4wd with the help of Sky's Offroad Design: 2" Front RSK kit using super duty springs. Yes this kit is intended for 4wd trucks, but for the time and money this is a far superior option than trying to design your own without a CAD program and a plasma table. I will be starting a write up on it once I get into it pretty good to help anyone with the necessary modifications to use this kit to convert their 2wd also. The truck will be sitting on what I believe are U code superduty springs and a dana 60 from a 1996 F350. Then also for the rear I will be using Sky's Offroad Design's Rear 08-16 Superduty leaf spring swap kit. I'm not 100% sure how this is going to sit yet, but I hope with this combination I'll be able to eliminate the rear block completely or only run stock F250 block. As for the rest of the truck I'm not quite sure all what I'm going to do with it so please follow along with me :) Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 27, 2019 Share Posted August 27, 2019 Vincent - Welcome! What part of central Arkansas? We have a member's map (Bullnose Forum/Member's Map in the menu) and I'd be happy to put you on it. And, by the way, we have the show here, being Skiatook, OK, on Sept 21st. Come on over, several of the guys will be here. On the front suspension, as you know we are going along somewhat parallel paths - to the point that I'm going to try u-code springs as that's what I have. They may be too soft, but we shall see. Link to comment Share on other sites More sharing options...
1986F150Six Posted August 27, 2019 Share Posted August 27, 2019 Vincent - Welcome! What part of central Arkansas? We have a member's map (Bullnose Forum/Member's Map in the menu) and I'd be happy to put you on it. And, by the way, we have the show here, being Skiatook, OK, on Sept 21st. Come on over, several of the guys will be here. On the front suspension, as you know we are going along somewhat parallel paths - to the point that I'm going to try u-code springs as that's what I have. They may be too soft, but we shall see. Welcome, Vincent! Link to comment Share on other sites More sharing options...
VWThomason Posted August 27, 2019 Author Share Posted August 27, 2019 Vincent - Welcome! What part of central Arkansas? We have a member's map (Bullnose Forum/Member's Map in the menu) and I'd be happy to put you on it. And, by the way, we have the show here, being Skiatook, OK, on Sept 21st. Come on over, several of the guys will be here. On the front suspension, as you know we are going along somewhat parallel paths - to the point that I'm going to try u-code springs as that's what I have. They may be too soft, but we shall see. Just a few minutes outside of Little Rock in a little place called Avilla, but my address is Alexander. I'd love to make it over, but I won't be able to make it. I got a lot going on in the coming months. Plus need to focus on this Fummins and get it road ready. As far as the springs go I don't think they'll be too soft as long as you're running a sway bar. My 93 rides so dang rough I'll be glad to have a soft ride. If it's too much I'll upgrade to the dual shock setup and that should work out to be enough recipe for a good ride. Link to comment Share on other sites More sharing options...
grumpin Posted August 27, 2019 Share Posted August 27, 2019 Just a few minutes outside of Little Rock in a little place called Avilla, but my address is Alexander. I'd love to make it over, but I won't be able to make it. I got a lot going on in the coming months. Plus need to focus on this Fummins and get it road ready. As far as the springs go I don't think they'll be too soft as long as you're running a sway bar. My 93 rides so dang rough I'll be glad to have a soft ride. If it's too much I'll upgrade to the dual shock setup and that should work out to be enough recipe for a good ride. Welcome! Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 27, 2019 Share Posted August 27, 2019 Just a few minutes outside of Little Rock in a little place called Avilla, but my address is Alexander. I'd love to make it over, but I won't be able to make it. I got a lot going on in the coming months. Plus need to focus on this Fummins and get it road ready. As far as the springs go I don't think they'll be too soft as long as you're running a sway bar. My 93 rides so dang rough I'll be glad to have a soft ride. If it's too much I'll upgrade to the dual shock setup and that should work out to be enough recipe for a good ride. You are now on the map. Sorry you can't make it, but there's always next year. And while we have several coming this year, there are even more planning for it next year. I will have a sway bar on, but if it limits articulation it may be disconnected. We'll see how it works out. Link to comment Share on other sites More sharing options...
salans7 Posted August 27, 2019 Share Posted August 27, 2019 You are now on the map. Sorry you can't make it, but there's always next year. And while we have several coming this year, there are even more planning for it next year. I will have a sway bar on, but if it limits articulation it may be disconnected. We'll see how it works out. Welcome Vincent! Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted August 28, 2019 Share Posted August 28, 2019 Welcome Vincent! Gary mentioned having you over from Facebook and I'm glad for your input on the SORD RSK. (I think I was the impetus for his decision to go that way with Big Blue) At any rate, I'm glad to find your intro and look forward to following your CC Fummins project here on the forum. Link to comment Share on other sites More sharing options...
Recommended Posts