Gary Lewis Posted February 18, 2018 Share Posted February 18, 2018 Sorry. I thought you wanted the spring that's wrapped around the secondary shaft at the lower rear of the carb. I'm trudging around in the slush now but will get other pics when I have time and place to pull the air cleaner again. Thanks. Really appreciate it. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted February 18, 2018 Share Posted February 18, 2018 Thanks. Really appreciate it. I suppose I should post them in the dedicated thread? Hopefully I can finish what I'm doing before nightfall. Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 18, 2018 Share Posted February 18, 2018 I suppose I should post them in the dedicated thread? Hopefully I can finish what I'm doing before nightfall. That would probably be best. But wherever works. Link to comment Share on other sites More sharing options...
Bruno2 Posted February 19, 2018 Author Share Posted February 19, 2018 I may have forgotten to tell you thanks for the sector box and bolts as well Gary. Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 19, 2018 Share Posted February 19, 2018 I may have forgotten to tell you thanks for the sector box and bolts as well Gary. I'm sure you did. And thanks to you for the help with Huck and the microfiche viewers. It was a productive day - except we didn't get the carb done. Link to comment Share on other sites More sharing options...
Bruno2 Posted February 19, 2018 Author Share Posted February 19, 2018 I'm sure you did. And thanks to you for the help with Huck and the microfiche viewers. It was a productive day - except we didn't get the carb done. Sounds like the carb is about to come together. I am really curious to see if the comment in the book about the electric choke being uninstallable has any merit. Sure looked false from I was seeing. However, I wonder if we are going to have linkage issues? IOW, will the choke linkage on the 1406 parts carb not be the correct length??? Link to comment Share on other sites More sharing options...
Bruno2 Posted February 25, 2018 Author Share Posted February 25, 2018 Sounds like the carb is about to come together. I am really curious to see if the comment in the book about the electric choke being uninstallable has any merit. Sure looked false from I was seeing. However, I wonder if we are going to have linkage issues? IOW, will the choke linkage on the 1406 parts carb not be the correct length??? I checked my gasket supplies while I was at the shop measuring the wheelbase for the fuel tanks. I am using some certain specific gaskets that are keeping me from buying a master gasket set. I need the 0.039 Thickness head gaskets for the build. Also, I like the Fel Pro one piece oil pan gasket. I cant get a master set with those in it. I had some left over from other projects as well as some of the new parts came with their own. All I need is the rear main seal, intake set and a timing cover gasket. I ordered those from Rockauto today for like $21 total after shipping. As soon as they arrive I can start building the motor. Link to comment Share on other sites More sharing options...
Gary Lewis Posted February 25, 2018 Share Posted February 25, 2018 I checked my gasket supplies while I was at the shop measuring the wheelbase for the fuel tanks. I am using some certain specific gaskets that are keeping me from buying a master gasket set. I need the 0.039 Thickness head gaskets for the build. Also, I like the Fel Pro one piece oil pan gasket. I cant get a master set with those in it. I had some left over from other projects as well as some of the new parts came with their own. All I need is the rear main seal, intake set and a timing cover gasket. I ordered those from Rockauto today for like $21 total after shipping. As soon as they arrive I can start building the motor. That's basically what I've run into, having to piece things together to get the gaskets I want. Link to comment Share on other sites More sharing options...
Bruno2 Posted March 2, 2018 Author Share Posted March 2, 2018 That's basically what I've run into, having to piece things together to get the gaskets I want. Gaskets are here! Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 2, 2018 Share Posted March 2, 2018 Gaskets are here! So you are building an engine on Saturday? Link to comment Share on other sites More sharing options...
Recommended Posts