Gary Lewis Posted September 5, 2017 Author Share Posted September 5, 2017 Gary, several times I have been logged in, gone to make a post, and when I click "Post Message" it takes me back to the login screen. Once I re login it brings me right back to my post so I can post it. And you didn't lose your post? Wow! But, I think you are saying the problem is that you were logged in but it wouldn't let you post. I thought I was having so,liar problems, but discovered that I really wasn't logged in. Since you can look at anything without being logged in it is easy to miss when you aren't - until you start to post. In my case it didn't show "Gary Lewis" in the upper right and I wasn't logged in. Link to comment Share on other sites More sharing options...
85lebaront2 Posted September 6, 2017 Share Posted September 6, 2017 And you didn't lose your post? Wow! But, I think you are saying the problem is that you were logged in but it wouldn't let you post. I thought I was having so,liar problems, but discovered that I really wasn't logged in. Since you can look at anything without being logged in it is easy to miss when you aren't - until you start to post. In my case it didn't show "Gary Lewis" in the upper right and I wasn't logged in. It showed me as being logged in, I usually log in in case I see something I want to reply to. Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 6, 2017 Author Share Posted September 6, 2017 It showed me as being logged in, I usually log in in case I see something I want to reply to. Ok. Strange. Link to comment Share on other sites More sharing options...
85lebaront2 Posted September 6, 2017 Share Posted September 6, 2017 Ok. Strange. Just did it to me again replying to Jim's message. I logged in, saw his message, opened it, formulated my reply by looking up some information I have here from my build and when i hit "post message" it brought me back to the login screen. Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 6, 2017 Author Share Posted September 6, 2017 Just did it to me again replying to Jim's message. I logged in, saw his message, opened it, formulated my reply by looking up some information I have here from my build and when i hit "post message" it brought me back to the login screen. Bizarre. And it didn't lose your input? I will check to see if this is a known problem. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted September 7, 2017 Share Posted September 7, 2017 Bizarre. And it didn't lose your input? I will check to see if this is a known problem. Bill, Are you deleting browser cache and cookies every time you close a session? Link to comment Share on other sites More sharing options...
85lebaront2 Posted September 7, 2017 Share Posted September 7, 2017 Bill, Are you deleting browser cache and cookies every time you close a session? It is supposed to, at least now I have the favicon showing. Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 7, 2017 Author Share Posted September 7, 2017 It is supposed to, at least now I have the favicon showing. At least you have the favicon? Glad it finally showed up. I was beginning to think I was the only one to see it. Link to comment Share on other sites More sharing options...
ctubutis Posted September 7, 2017 Share Posted September 7, 2017 It is supposed to, at least now I have the favicon showing.I still see the weebly w. From: 85lebaront2 [via Bullnose Enthusiasts] <redacted_email_address>To: ctubutis <redacted_email_address>Sent: Wednesday, September 6, 2017 7:29 PMSubject: Re: Easy Way To Go To Last Post In Thread It is supposed to, at least now I have the favicon showing. "Getting old is inevitable, growing up is optional"1986 F-350, 2011 Flex If you reply to this email, your message will be added to the discussion below: http://bullnose-enthusiasts.12971.n8.nabble.com/Observed-Problems-tp17p1241.html To unsubscribe from Observed Problems, click here. NAML Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 7, 2017 Author Share Posted September 7, 2017 Clear your cache. And, by the way, have you introduced Bill to the forum? Link to comment Share on other sites More sharing options...
Recommended Posts