jdavidsmi Posted November 4, 2017 Share Posted November 4, 2017 Well, I thought I had fixed the electrical issues with my truck, but not. A couple of days ago on the way to town I noticed the volt meter was dropping from 13 volts down pass 12 volts and by the time I got to the auto parts store, I was not sure I would make it in. The battery was all but dead. I thought the new alternator had died, it's only 2 months old, but the alternator and battery both tested OK. but not the voltage regulator, so I installed in a new one, still would not charge. By now the battery was dead and had to be jumped to start the truck. The store clerk got a heavy duty one and everything started working. I completed the shopping I need without any issues. On the way home the volt meter started climbing up to about 18 volts by the time I got home. Its a 15 to 20 min ride. To day when I started it up, the voltage started out 12. 67 with my DVM at idle. As the truck idled the voltage started climbing, within 15 min it was back up to 16.97 and climbing, I shut it down. Battery was fully charged, and nothing that I know of was on. :nabble_anim_confused:Is it possible I have too heavy duty voltage regulator?? Is that even possible?? Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 4, 2017 Share Posted November 4, 2017 First, I've just changed my browser allegiance to Edge as with Chrome I can't see your signature, and that information is important. Anyway, I don't know if there is such a thing as too heavy duty of a regulator. But, something sure is wrong. You should never see over about 14.5 volts, and if you continue driving it with higher voltage you'll boil the battery dry and probably blow some bulbs. Since you had the regulator off it is possible that the ground on the regulator is bad. It is supposed to ground to the fender via the two bolts that hold it on. So I'd start there, and if that doesn't do it then I'd take the regulator back. Link to comment Share on other sites More sharing options...
jdavidsmi Posted November 4, 2017 Author Share Posted November 4, 2017 First, I've just changed my browser allegiance to Edge as with Chrome I can't see your signature, and that information is important. Anyway, I don't know if there is such a thing as too heavy duty of a regulator. But, something sure is wrong. You should never see over about 14.5 volts, and if you continue driving it with higher voltage you'll boil the battery dry and probably blow some bulbs. Since you had the regulator off it is possible that the ground on the regulator is bad. It is supposed to ground to the fender via the two bolts that hold it on. So I'd start there, and if that doesn't do it then I'd take the regulator back. Gary, thanks for the answer. I just cleaned both contact points where the bolts are for the regulator, plus I added a ground wire between one of the bolts and a known good ground. Did not make any difference, as everything warmed up the voltage went up. So back to NAPA Monday. Is there something I need to change so you can see my Signature? Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 4, 2017 Share Posted November 4, 2017 Gary, thanks for the answer. I just cleaned both contact points where the bolts are for the regulator, plus I added a ground wire between one of the bolts and a known good ground. Did not make any difference, as everything warmed up the voltage went up. So back to NAPA Monday. Is there something I need to change so you can see my Signature? Good plan. Gotta be the regulator. I see your sig perfectly using Microsoft Edge as the browser, but not when using Google's Chrome. So, it isn't you and I don't think there's anything than can be done to make Chrome work. Link to comment Share on other sites More sharing options...
grumpin Posted November 4, 2017 Share Posted November 4, 2017 First, I've just changed my browser allegiance to Edge as with Chrome I can't see your signature, and that information is important. Anyway, I don't know if there is such a thing as too heavy duty of a regulator. But, something sure is wrong. You should never see over about 14.5 volts, and if you continue driving it with higher voltage you'll boil the battery dry and probably blow some bulbs. Since you had the regulator off it is possible that the ground on the regulator is bad. It is supposed to ground to the fender via the two bolts that hold it on. So I'd start there, and if that doesn't do it then I'd take the regulator back. It sounds like the new voltage regulator isn't controlling the output from the alternator. Or when the VR gets warmed up it loses control of the volts. I use Firefox so I can see the signatures. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted November 4, 2017 Share Posted November 4, 2017 Good plan. Gotta be the regulator. I see your sig perfectly using Microsoft Edge as the browser, but not when using Google's Chrome. So, it isn't you and I don't think there's anything than can be done to make Chrome work. I see David's sig in Chrome.... Check to see if the regulator is getting proper 'sense' voltage. If the regulator doesn't know the battery is charged (or the system voltage is 14.7) it will tell the alternator to keep charging. Link to comment Share on other sites More sharing options...
PetesPonies Posted November 5, 2017 Share Posted November 5, 2017 It sounds like the new voltage regulator isn't controlling the output from the alternator. Or when the VR gets warmed up it loses control of the volts. I use Firefox so I can see the signatures. Yes, an un-regulated alternator will create 18 to 24 volts or so. So if you saw 18, then it was not regulating the alternator . . .which means turning it on and off. It was being left on. So if something can leave it on . then it seems plausible the something can also leave it off :) which is what happens when there is no charging. An alternator is constantly being turned on and off, how much on determines how much power is generated, which is to supply how much power is being used. So it varies depending on your load. Now . .can an electronic part malfunction is both ways? Not likely. A mechanical regulator, absolutely, but you don't have one of those. So after all this verbiage . . . I think I would still start running down connections. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted November 5, 2017 Share Posted November 5, 2017 David, does "factory ac, no tach" in your signature mean you have an idiot light dash with no ammeter? There are two ways to wire a 1G alternator depending on how the dash is optioned. I have pointed this out in a number of 3G swap threads on FTE. If the alternator and regulator connections are not correct for the way the truck harness is set up you will have the problems you do. 'Heavy Duty' doesn't mean anything to me. But the order of wires in the regulator plug matters. Link to comment Share on other sites More sharing options...
85lebaront2 Posted November 5, 2017 Share Posted November 5, 2017 David, does "factory ac, no tach" in your signature mean you have an idiot light dash with no ammeter? There are two ways to wire a 1G alternator depending on how the dash is optioned. I have pointed this out in a number of 3G swap threads on FTE. If the alternator and regulator connections are not correct for the way the truck harness is set up you will have the problems you do. 'Heavy Duty' doesn't mean anything to me. But the order of wires in the regulator plug matters. Jim, on the 1980-86 dash, the tach was an option and sat in a small center area of the cluster, with no tach there was a blanking plate installed where it would mount. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted November 5, 2017 Share Posted November 5, 2017 Jim, on the 1980-86 dash, the tach was an option and sat in a small center area of the cluster, with no tach there was a blanking plate installed where it would mount. This doesn't tell me if it's ammeter or idiot light. Link to comment Share on other sites More sharing options...
Recommended Posts