ArdWrknTrk Posted November 4, 2017 Share Posted November 4, 2017 Put Your wants in so I don’t trash or break anything. 😉 Gary, I told you I want the pad that goes above the radio and glove box. And the drivers side seat belts. And the wiper switch and speed governor. I'm going to find a cheap motor on eBay or somewhere else. Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 4, 2017 Share Posted November 4, 2017 Gary, I told you I want the pad that goes above the radio and glove box. And the drivers side seat belts. And the wiper switch and speed governor. I'm going to find a cheap motor on eBay or somewhere else. Yep, but nothing else? Link to comment Share on other sites More sharing options...
reamer Posted November 4, 2017 Share Posted November 4, 2017 Yep, but nothing else? SEM also make a prep for vinyl, I believe Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted November 4, 2017 Share Posted November 4, 2017 Yep, but nothing else? Maybe the filler/valance between grille and bumper if it is straight. I found my wiper problem. A pin backed out of the lower plug. Link to comment Share on other sites More sharing options...
85lebaront2 Posted November 4, 2017 Share Posted November 4, 2017 Maybe the filler/valance between grille and bumper if it is straight. I found my wiper problem. A pin backed out of the lower plug. Glad to hear that Jim. Probably been that way for a while. Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 4, 2017 Share Posted November 4, 2017 Gary, I told you I want the pad that goes above the radio and glove box. And the drivers side seat belts. And the wiper switch and speed governor. I'm going to find a cheap motor on eBay or somewhere else. Jim - Glad you found the problem. I have the following out/off. Let's see if that's what you want: Driver's seat belts. These things are nasty as the mice have had a good life in the huck, but they look to be good otherwise and will probably was up fine. Pad above radio and glove box. It appears to be fine. Wiper switch and delay box Valance. This has a dent on the passenger's side, as shown below, so I doubt you want to pay the shipping on it. But, that's your call. Is this what you want? Anything else? Link to comment Share on other sites More sharing options...
PetesPonies Posted November 4, 2017 Share Posted November 4, 2017 Jim - Glad you found the problem. I have the following out/off. Let's see if that's what you want: Driver's seat belts. These things are nasty as the mice have had a good life in the huck, but they look to be good otherwise and will probably was up fine. Pad above radio and glove box. It appears to be fine. Wiper switch and delay box Valance. This has a dent on the passenger's side, as shown below, so I doubt you want to pay the shipping on it. But, that's your call. Is this what you want? Anything else? No A pillar trim or corner trim in this cab? Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 4, 2017 Share Posted November 4, 2017 No A pillar trim or corner trim in this cab? Yes, but it is a '90 and that stuff is different. I'm not sure of what all the differences are, but one is that the shoulder belt winder is at a different location. However, I can post a pic of the Bullnose one by this one if you want. Link to comment Share on other sites More sharing options...
PetesPonies Posted November 5, 2017 Share Posted November 5, 2017 Yes, but it is a '90 and that stuff is different. I'm not sure of what all the differences are, but one is that the shoulder belt winder is at a different location. However, I can post a pic of the Bullnose one by this one if you want. I guess it couldn't hurt, how about the A pillar? different too? Link to comment Share on other sites More sharing options...
Gary Lewis Posted November 5, 2017 Share Posted November 5, 2017 I guess it couldn't hurt, how about the A pillar? different too?Yes, the A pillars are different as well. I'll try to remember to take pics of both, side by side, and post them tomorrow. But, I don't think the later ones can be used, although it would be cool if they could be. On Sat, Nov 4, 2017 at 8:26 PM, PetesPonies [via Bullnose Enthusiasts] <redacted_email_address> wrote: Link to comment Share on other sites More sharing options...
Recommended Posts