Gary Lewis Posted October 22, 2017 Share Posted October 22, 2017 It's a Zf truck There is no column shifter Duh! I just typed “ZF” on a post I’m working on and didn’t make the connection. But, while on the ZF theme, did you get the harness that goes to the ZF? I need the connector so I can connect into BB’s harness. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted October 22, 2017 Author Share Posted October 22, 2017 Duh! I just typed “ZF” on a post I’m working on and didn’t make the connection. But, while on the ZF theme, did you get the harness that goes to the ZF? I need the connector so I can connect into BB’s harness. That darn plug is stupid expensive. I remember from when I went from T-19 to Zf-5 Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 22, 2017 Share Posted October 22, 2017 That darn plug is stupid expensive. I remember from when I went from T-19 to Zf-5 Exactly. Link to comment Share on other sites More sharing options...
85lebaront2 Posted October 22, 2017 Share Posted October 22, 2017 So, you want the steering wheel?.... Yes, if if is in decent shape, mine is starting to come apart where the "cover" is stitched. Also, in stripping it down, if it isn't to big an issue, I would like to get the heater inside case, don't need the core, just the box. It is for another project, EATC for the trucks that will do the air distribution splits like the later trucks. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted October 22, 2017 Author Share Posted October 22, 2017 Yes, if if is in decent shape, mine is starting to come apart where the "cover" is stitched. Also, in stripping it down, if it isn't to big an issue, I would like to get the heater inside case, don't need the core, just the box. It is for another project, EATC for the trucks that will do the air distribution splits like the later trucks. The passenger side Dash Mount is broken as they all are. I don't have my 5.5 mm TFT socket with me, is it okay to cut the inertia switch the passenger kick panel? Do you want the whole heater ducting all the way to the firewall? Link to comment Share on other sites More sharing options...
85lebaront2 Posted October 22, 2017 Share Posted October 22, 2017 The passenger side Dash Mount is broken as they all are. I don't have my 5.5 mm TFT socket with me, is it okay to cut the inertia switch the passenger kick panel? Do you want the whole heater ducting all the way to the firewall? Just unplug it or if you want cut the piece it attaches to out. On the heater duct, yes, all the inside to the firewall, you can keep the core for yours. On the right end, no problem Bronco Graveyard has a nice metal repair bracket that solves the issue. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted October 22, 2017 Author Share Posted October 22, 2017 Just unplug it or if you want cut the piece it attaches to out. On the heater duct, yes, all the inside to the firewall, you can keep the core for yours. On the right end, no problem Bronco Graveyard has a nice metal repair bracket that solves the issue. A pile for Bill. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted October 22, 2017 Author Share Posted October 22, 2017 A pile for Bill. Plus the full size radiator, of course... Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted October 22, 2017 Author Share Posted October 22, 2017 Plus the full size radiator, of course... Late model clutch slave with braided stainless hose and heat reflective boot. Link to comment Share on other sites More sharing options...
85lebaront2 Posted October 22, 2017 Share Posted October 22, 2017 Plus the full size radiator, of course... For who, you I assume. I just had to replace mine, leaking along the left side tank crimp. Link to comment Share on other sites More sharing options...
Recommended Posts