ArdWrknTrk Posted May 16 Share Posted May 16 Gary, my truck does have A/C if that helps. Thank you everyone for digging into this. We're here to answer your questions and help revive your truck! Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 16 Share Posted May 16 Gary, my truck does have A/C if that helps. Thank you everyone for digging into this. Do any of the parts in my pic look like what you need? If so I'll see if I still have them. Link to comment Share on other sites More sharing options...
Jermd21 Posted May 16 Author Share Posted May 16 Gary, my truck does have A/C if that helps. Thank you everyone for digging into this. Do any of the parts in my pic look like what you need? If so I'll see if I still have them. Gary, I don’t see anything in that picture that looks familiar. Thank you though. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted May 16 Share Posted May 16 Gary, I don’t see anything in that picture that looks familiar. Thank you though. Actually you need the cast aluminum piece in the bottom center of the photo. (It's painted red) Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 16 Share Posted May 16 Actually you need the cast aluminum piece in the bottom center of the photo. (It's painted red) Jim - I pulled those bits out of the bin and checked them out, and if I got the right one you were talking about then I'm pretty sure that's not it. The ID# is E5HE 9C476-BA. (There is no E5HE 9C478-anything, so that's actually a "6" not an "8".) And that decodes to E5HZ 9B450-A, which is a BRACKET (EXHAUST AIR SUPPLY PUMP MOUNTING) with a 85/87 E-F250/350 & a 460. The illustration seems to match the pictures. So let me do some research to see what else I have and what part is needed... Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted May 16 Share Posted May 16 Jim - I pulled those bits out of the bin and checked them out, and if I got the right one you were talking about then I'm pretty sure that's not it. The ID# is E5HE 9C476-BA. (There is no E5HE 9C478-anything, so that's actually a "6" not an "8".) And that decodes to E5HZ 9B450-A, which is a BRACKET (EXHAUST AIR SUPPLY PUMP MOUNTING) with a 85/87 E-F250/350 & a 460. The illustration seems to match the pictures. So let me do some research to see what else I have and what part is needed... The new perspective makes it clear. Sorry, I'm stuck in a bed and can't reach my glasses. He's showing the casting that's bolted to the pump itself, and the pulley is pressed on the other side. Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 16 Share Posted May 16 The new perspective makes it clear. Sorry, I'm stuck in a bed and can't reach my glasses. He's showing the casting that's bolted to the pump itself, and the pulley is pressed on the other side. Yes, he's showing base # 3A732, as shown below. Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 16 Share Posted May 16 Yes, he's showing base # 3A732, as shown below. Maybe I'm blind, but I don't see that in this listing for a 460 in an F-Series. Am I missing something? Jermd21 - Can you find the ID# on that part? I should be able to cross it to the PN. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted May 16 Share Posted May 16 Maybe I'm blind, but I don't see that in this listing for a 460 in an F-Series. Am I missing something? Jermd21 - Can you find the ID# on that part? I should be able to cross it to the PN. It's D8AZ-A '83-'89 F-100-350, F-Superduty and F53 stripped chassis. The only engine available in all of those is a 460. Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 16 Share Posted May 16 Maybe I'm blind, but I don't see that in this listing for a 460 in an F-Series. Am I missing something? Jermd21 - Can you find the ID# on that part? I should be able to cross it to the PN. Well, I think I may have one! Found a power steering pump that still has the bracket on it, and the pulley is marked E3TC 3D673-CA, which is PN E3TZ 3A733-C and that fits an 83 on 460 with 4wd. So it must be the C-II pump off of Big Blue. I'll pull the pulley off and see what the bracket's # is... Link to comment Share on other sites More sharing options...
Recommended Posts