Mastermind Worksaws Posted April 11 Author Share Posted April 11 Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 11 Share Posted April 11 I'm a monkey....with a gun. It is sorta kinda my business logo. mastermindsaws.com Monkey's have tails. Great apes: gibbons, gorillas, orangutan's etc... don't. Even though some (Orangutan's esp) don't really walk on the ground. I'm old enough to remember the original Planet of the Apes. I'll have to check out your site. I like building saws. 😉 Edit: I watch an older guy (Walt) on YouTube Hilltopsawshop. He has fettled* a lot of "kits" in his day, on top of maintaining local cutters equipment. Link to comment Share on other sites More sharing options...
Mastermind Worksaws Posted April 12 Author Share Posted April 12 Monkey's have tails. Great apes: gibbons, gorillas, orangutan's etc... don't. Even though some (Orangutan's esp) don't really walk on the ground. I'm old enough to remember the original Planet of the Apes. I'll have to check out your site. I like building saws. 😉 Edit: I watch an older guy (Walt) on YouTube Hilltopsawshop. He has fettled* a lot of "kits" in his day, on top of maintaining local cutters equipment. I'm wanting to chit can the IDI in a 4wd truck. It's a T19 transmission I believe. Hydraulic clutch. What bellhousing would I need to put a 460 in it? Link to comment Share on other sites More sharing options...
Mastermind Worksaws Posted April 12 Author Share Posted April 12 Monkey's have tails. Great apes: gibbons, gorillas, orangutan's etc... don't. Even though some (Orangutan's esp) don't really walk on the ground. I'm old enough to remember the original Planet of the Apes. I'll have to check out your site. I like building saws. 😉 Edit: I watch an older guy (Walt) on YouTube Hilltopsawshop. He has fettled* a lot of "kits" in his day, on top of maintaining local cutters equipment. Walt is a good guy. Another fella named Bob is in some videos with him once in awhile. Bob and I have done a lot of business together. He retired a few years ago from saw work....at least for the general public. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 12 Share Posted April 12 I'm wanting to chit can the IDI in a 4wd truck. It's a T19 transmission I believe. Hydraulic clutch. What bellhousing would I need to put a 460 in it? A 460 bell housing. I sold mine when I went Zf-5 in 2011. Walt can wander a bit. But he's a railfan, so he's got to be a good guy. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 12 Share Posted April 12 I'm wanting to chit can the IDI in a 4wd truck. It's a T19 transmission I believe. Hydraulic clutch. What bellhousing would I need to put a 460 in it? E4TZ 7505-B is the part number you want. Paradoxically, the number ON a Ford part is NOT the part number, it is an engineering number. Look for one marked E4TA 7500-DA, or E7TA 7500-BA The "stud" (7b602) is the mushroom post the clutch throw out arm pivots on.... Edit to add: they are rare as hens teeth! Link to comment Share on other sites More sharing options...
Mastermind Worksaws Posted April 12 Author Share Posted April 12 E4TZ 7505-B is the part number you want. Paradoxically, the number ON a Ford part is NOT the part number, it is an engineering number. Look for one marked E4TA 7500-DA, or E7TA 7500-BA The "stud" (7b602) is the mushroom post the clutch throw out arm pivots on.... Edit to add: they are rare as hens teeth! I'm beginning to think I'd be better off building a C6 transmission instead... Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 12 Share Posted April 12 I'm beginning to think I'd be better off building a C6 transmission instead... C6's are really good at turning gasoline into hot fluid. They're bulletproof, but no good for economy Your choice.... Remember, if you go that way you'll need a new steering column and instrument cluster. Link to comment Share on other sites More sharing options...
Mastermind Worksaws Posted April 12 Author Share Posted April 12 I'm beginning to think I'd be better off building a C6 transmission instead... I'm thinking about the ZF-5 now.....is that transmission compatible with the transfer case in my truck? Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 12 Share Posted April 12 I'm thinking about the ZF-5 now.....is that transmission compatible with the transfer case in my truck? Yes. I have a 4wd Zf-5 in my T-19 truck Link to comment Share on other sites More sharing options...
Recommended Posts