Jump to content
Bullnose Forums

Parking brake switch wanted


ArdWrknTrk

Recommended Posts

I did find this from our Numberdummy friend,

So, it is the same as '84>

Okie dokie. I will pull the one I have out and send a pic. Its the entire parking brake assembly I took off an 85-86 parts truck. Only reason I recall it being an 85 is because it had a factory fuel-injected 302. Hopefully it has a switch :nabble_crossed-fingers-20-pixel_orig:

Else I definitely have one on my '86 parts truck

Link to comment
Share on other sites

  • Replies 39
  • Created
  • Last Reply

Top Posters In This Topic

Okie dokie. I will pull the one I have out and send a pic. Its the entire parking brake assembly I took off an 85-86 parts truck. Only reason I recall it being an 85 is because it had a factory fuel-injected 302. Hopefully it has a switch http://www.garysgaragemahal.com/uploads/6/5/8/7/65879365/crossed-fingers-20-pixel_orig.png

Else I definitely have one on my '86 parts truck

Well I recall now. I broke the “spade” when I pulled the wiring connector off this parking brake assembly… found this on a random parts truck I saw on the side of a road (I was in a hurry and didn’t have any tools with me except a basic kit so I’m surprised at all I pulled the assembly). It didn’t have all this surface rust, must be from condensation from within storage tubs.

07332D1A-B24D-42BA-B61B-56C8718B38EB.jpeg.20fcdc9694712853319774c865502a08.jpeg

The spade appears to be made from a HDF/MDF material and I was able to break it in half yet again with ease but then its probably weakened by moisture

D1958CE5-C36C-48E3-A145-10AE0B81AF4F.jpeg.f937f9ec7cd452918476db8ca29a0a89.jpeg

Good news is my other parts truck has a good switch, if the pics below look good just email me the address and I’ll mail it later this week

Part number E4TB-15852-AB

C9788CF6-5F6A-46E0-9B9F-691AD0B2E70C.jpeg.62160dc9879a351bf30dc1c92f4b95f0.jpeg

128DDF15-04FA-4150-97EA-BB8252F4F383.jpeg.c0599331660754bed64394c004bb4064.jpeg

Link to comment
Share on other sites

Well I recall now. I broke the “spade” when I pulled the wiring connector off this parking brake assembly… found this on a random parts truck I saw on the side of a road (I was in a hurry and didn’t have any tools with me except a basic kit so I’m surprised at all I pulled the assembly). It didn’t have all this surface rust, must be from condensation from within storage tubs.

The spade appears to be made from a HDF/MDF material and I was able to break it in half yet again with ease but then its probably weakened by moisture

Good news is my other parts truck has a good switch, if the pics below look good just email me the address and I’ll mail it later this week

Part number E4TB-15852-AB

Are you sure that isn't marked E4TB 15852-BA?

Bill usually doesn't make make mistakes like that.... 🙄

Edit: I stand corrected! I zoomed the heck out of my phone and YOU have it right. Sorry. :nabble_smiley_blush:

I have a need, and will try to email you through this clunky forum software....

Link to comment
Share on other sites

Are you sure that isn't marked E4TB 15852-BA?

Bill usually doesn't make make mistakes like that.... 🙄

Edit: I stand corrected! I zoomed the heck out of my phone and YOU have it right. Sorry. :nabble_smiley_blush:

I have a need, and will try to email you through this clunky forum software....

Once again I seem to fail at crosswalks, motorcycles, buses and traffic lights.

I am going to flat out refuse to train someone else's AI to identify targets.

Perhaps Gary can connect us?

Link to comment
Share on other sites

Once again I seem to fail at crosswalks, motorcycles, buses and traffic lights.

I am going to flat out refuse to train someone else's AI to identify targets.

Perhaps Gary can connect us?

You two have an email connecting you. :nabble_smiley_wink:

Link to comment
Share on other sites

I am going to flat out refuse to train someone else's AI to identify targets.

:nabble_head-rotfl-57x22_orig:

You are definitely in the spectrum Jim!!! You remind me of Jack Nicholson's character in 'As Good As it Gets".

 

Link to comment
Share on other sites

https://forum.garysgaragemahal.com/file/n150776/15086879520441469900444.jpg

Wow! This guy left his parking place REALLY FAST!

:nabble_smiley_whistling:

That was the picture Jim sent of the dash and support along with other parts he salvaged from an F450.

Link to comment
Share on other sites


×
×
  • Create New...