Ifitaintbroke Posted April 9 Author Share Posted April 9 Well never mind.. I forgot for a moment the Reed fuel sender is a sender only... still needs the old "sucker" installed. Needs 2 holes in the tank. Better be a damn good sender !! The other problem is that the senders on these tanks go in at an angle. That makes for a longer distance to the bottom, and these senders will be on the short side already. I have no problem cutting new holes in the tanks, main concern is bed clearance. The senders are 1" from the bottom of the gasket to the top of the sending thing. Should be enough room. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted April 9 Share Posted April 9 https://www.tanksinc.com/index.cfm/page/ptype=product/product_id=926/category_id=184/mode=prod/prd926.htm I was in excruciating pain last night. I asked without bothering to look. Appreciate the info, Vivek Link to comment Share on other sites More sharing options...
Recommended Posts