Ifitaintbroke Posted March 30 Author Share Posted March 30 I meant to say, the type of moron who eliminates them because "We don't need no stinkin safeties! It's just another point of failure" Failsafe is a thing for a reason And if you like napalm, be my guest. Just don't let your idiocy burn a passenger or bystander to a crisp 💡 I eliminated them because they don't do anything with a mechanical pump. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted March 30 Share Posted March 30 Ooh that looks nice. Does it match between different ohm ranges? Gary has a thread (of course! ) Go to www.technoversions.com first, and confirm that it will do what you need. Then give me an address and I will take it out of my truck and put it in a flat rate box. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted March 30 Share Posted March 30 I eliminated them because they don't do anything with a mechanical pump. I was responding to Viven, and his schematic. I have a mechanical pump too. But I obviously don't have any Hot Fuel wiring at all. Just the senders wired through my 6-port switch valve. Link to comment Share on other sites More sharing options...
Ifitaintbroke Posted March 30 Author Share Posted March 30 Gary has a thread (of course! ) Go to www.technoversions.com first, and confirm that it will do what you need. Then give me an address and I will take it out of my truck and put it in a flat rate box. I greatly appreciate that Jim! Let me do the homework first. Plus, I need at least 1 new sender, so I need to figure that out too. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted March 30 Share Posted March 30 I greatly appreciate that Jim! Let me do the homework first. Plus, I need at least 1 new sender, so I need to figure that out too. Pay it forward.... If it will fix your problem, it was meant to be. 💡 Link to comment Share on other sites More sharing options...
Ifitaintbroke Posted March 30 Author Share Posted March 30 Pay it forward.... If it will fix your problem, it was meant to be. 💡 Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted March 30 Share Posted March 30 Maybe you can cover the postage? I'm still scraping to get all the parts together and fix my axle. Driving on pavement with hubs locked is brutal on the front U-joints Link to comment Share on other sites More sharing options...
Ifitaintbroke Posted March 30 Author Share Posted March 30 Maybe you can cover the postage? I'm still scraping to get all the parts together and fix my axle. Driving on pavement with hubs locked is brutal on the front U-joints Of course! Paypal? Link to comment Share on other sites More sharing options...
Ifitaintbroke Posted March 30 Author Share Posted March 30 Maybe you can cover the postage? I'm still scraping to get all the parts together and fix my axle. Driving on pavement with hubs locked is brutal on the front U-joints I just skimmed their article on the Meter Match, and all I can say is WOW! That thing is exactly what I need. I like the ability to program multiple reference points and make it more accurate. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted March 30 Share Posted March 30 I just skimmed their article on the Meter Match, and all I can say is WOW! That thing is exactly what I need. I like the ability to program multiple reference points and make it more accurate. Or Venmo, whatever works for you. But let me get done with what I'm in the middle of, before I go out to the truck and use those tools to open the dash and remove it. I'll try to get it sent on Monday. When it's in your hands and you have it working, you can pay, alright? Link to comment Share on other sites More sharing options...
Recommended Posts