techguyfropalcs Posted November 14, 2023 Share Posted November 14, 2023 I am working on my 1980 F-100 that I recently acquired. The bed itself is in real nice shape, and looked amazing from the underside. However, after some blasting to prep for a spray in bed liner, the bottom floor panel seems to have rotted from the inside out. Long story short, does anyone made a replacement bed floor (the 4x8 sheet), as the rest of the bed is in nice shape. I see many places offer a replacement floor like I am looking for, but it is listed for the 73-79 trucks. Would I be able to make this panel work? Thanks, Caleb Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted November 14, 2023 Share Posted November 14, 2023 The corrugations are different. You can make it work if you are replacing the whole thing but it is not optimal. I bought six 20x48" panels from Mill Supply when I got after my bed eight years ago. They seem to have held up despite the drop-in polyethylene bedliner. Link to comment Share on other sites More sharing options...
techguyfropalcs Posted November 15, 2023 Author Share Posted November 15, 2023 The corrugations are different. You can make it work if you are replacing the whole thing but it is not optimal. I bought six 20x48" panels from Mill Supply when I got after my bed eight years ago. They seem to have held up despite the drop-in polyethylene bedliner. Ok, thanks for the info! I might try to make a die for my bead roller, to roll out the template for the congregation. I will have to do more examination after I get the bed off the truck to determine what I am going to do, but just wanted to explore my options. Link to comment Share on other sites More sharing options...
Recommended Posts