Jump to content
Bullnose Forums

Front sway bar - different for IDI diesel engine trucks??


1985IH69

Recommended Posts

Hi guys! Haven't been on here for some time due to having to put all of my projects on hold. I have a 1985 F350 2wd DRW which was originally equipped with a 460 gas engine/4spd trans. Decided to swap in a 7.3 IDI diesel and retain the 4spd. This truck was originally spec'd as a wrecker, with additional frame reinforcement, at the factory. Hence, it has sway bars both front and rear. However, as I'm sure a lot of you know, the radiator support for the diesel engine is "deeper" (or taller, depending on how you look at it), so it will not go in place without removing the front sway bar. I really hate to give the sway bar up, and have Google'd every set of search terms I could think of, to try to find a part number, diagram - anything, to no avail. I looked at the diagrams that Gary had posted, but didn't see one for the 1985 F350. If anyone could shed some light on this, I would be greatly appreciative. Thanks in advance to all who may reply.
Link to comment
Share on other sites

Is this the one you need? "1980/" means 1980 to the end of the catalog, which was 1989.

Thanks for the clarification on the year models. I'm not sure.....I don't know for a fact that Ford offered the front sway bar for the diesel models or not. If they did, then it would have to be different part number from the "gas" models. Hoping that some of the members on here might have a F350 with the diesel and can tell me if they have a front sway bar on theirs. Additionally, if such an "animal" does indeed exist, I would be open to buying a used one or new - doesn't matter. I would put new bushings on it, so I can't see where a used one wouldn't be just as good as a new one. But, I may be wrong about that - don't know.

Link to comment
Share on other sites

The illustrations in the factory manuals are unfortunately very generic.

When you see ford documentation with a forward slash and no closing year, it means it carries through...

But there's definitely a 2wd Diesel front sway bar part # shown under that section. https://www.garysgaragemahal.com/sway-bar.html

2wd Dsl Eng W/O Super Cooling E0TZ 5482-A, insulator E0TZ 5493-C

2wd Dsl Eng W Super Cooling E3TZ 5482-C, insulator E8TZ 5493-A

Brackets, links and stuff as well, but I'm trying to do this on my phone so you're going to have to get those for yourself.

Link to comment
Share on other sites

The illustrations in the factory manuals are unfortunately very generic.

When you see ford documentation with a forward slash and no closing year, it means it carries through...

But there's definitely a 2wd Diesel front sway bar part # shown under that section. https://www.garysgaragemahal.com/sway-bar.html

2wd Dsl Eng W/O Super Cooling E0TZ 5482-A, insulator E0TZ 5493-C

2wd Dsl Eng W Super Cooling E3TZ 5482-C, insulator E8TZ 5493-A

Brackets, links and stuff as well, but I'm trying to do this on my phone so you're going to have to get those for yourself.

Now we're making progress... Thanks to ArdWrknTrk for pointing out the part numbers and Gary for posting the info. Obviously, my "Ford catalog skills" are lacking...terribly. (Like Gene Winfield says, "Everyday is a school day". So true. I had picked up on this "super cooling" somewhere in my internet search, don't remember where, but obviously it's just a larger radiator??

Link to comment
Share on other sites

Now we're making progress... Thanks to ArdWrknTrk for pointing out the part numbers and Gary for posting the info. Obviously, my "Ford catalog skills" are lacking...terribly. (Like Gene Winfield says, "Everyday is a school day". So true. I had picked up on this "super cooling" somewhere in my internet search, don't remember where, but obviously it's just a larger radiator??

Thicker (more rows) but not "bigger" (wider, taller)

 

Link to comment
Share on other sites

And the tranny cooler mounts behind the radiator where it would obstruct the sway bar?

Why is the coolant capacity greater for super cooling trucks if the radiator is the same?

So it appears there are 2 different radiators and radiator supports with the difference determined by whether or not the truck has AC. I have a parts truck with the "Super Cooling" radiator w/radiator support (the tall one, if you will) and have the other one which is for a wider but shorter (non AC, we will assume) radiator. It appears when looking up radiators for the 1985 F350 they do show the 2 different radiators, with the short/wide one being more expensive. As mentioned above, I have 2 of the "Super Cooling" radiators with 1 matching radiator support, but the parts truck does not have the front sway bar. So anyone that might have a sway bar for this truck, please let me know.

Link to comment
Share on other sites

×
×
  • Create New...