twin I beam tie rods

[ArdWrknTrk]

Jim to the rescue!

I don't know about that...

I know what years and models came with a D50, but looking at RA there aren't too many options and if you go to the Moog page they have nothing but a sleeve.

[85blueox]

I don't know about that...

I know what years and models came with a D50, but looking at RA there aren't too many options and if you go to the Moog page they have nothing but a sleeve.

It's a Dana 50. The problem is the Twin I-beam suspension. I ordered from parts geek and it was wrong, spoke to A1auto, they have nothing to fit a 4X4, no good info on rockAuto about twin I beam and you can't call them, Local places have nothing. Moogparts does not show the different parts for TWIN vs Mono beam, Napa has the right side like I need but its $450.

[ArdWrknTrk]

It's a Dana 50. The problem is the Twin I-beam suspension. I ordered from parts geek and it was wrong, spoke to A1auto, they have nothing to fit a 4X4, no good info on rockAuto about twin I beam and you can't call them, Local places have nothing. Moogparts does not show the different parts for TWIN vs Mono beam, Napa has the right side like I need but its $450.

Have a look at this page from Jeff's Bronco Graveyard: https://shop.broncograveyard.com/F250-F350-4wd-Steering-Link/products/232/

They have inner, outer, center/drag & sleeves for '80-'85 250/350 TTB. ***in stock***

They also offer a complete 'kit' 32905. https://shop.broncograveyard.com/1980-85-F250-F350-Steering-Rod-Kit/productinfo/32905/

I can't say what brand, but Jeff's is very knowledgeable about suspension (that's where they started)

I don't think they sell bad parts. I've bought Dana/Spicer, Eaton and Moog from them before.

And they actually answer their phone if you have questions....

(link to kit directly)