ArdWrknTrk Posted August 22, 2023 Share Posted August 22, 2023 Jim to the rescue! I don't know about that... I know what years and models came with a D50, but looking at RA there aren't too many options and if you go to the Moog page they have nothing but a sleeve. Link to comment Share on other sites More sharing options...
85blueox Posted August 25, 2023 Author Share Posted August 25, 2023 I don't know about that... I know what years and models came with a D50, but looking at RA there aren't too many options and if you go to the Moog page they have nothing but a sleeve. It's a Dana 50. The problem is the Twin I-beam suspension. I ordered from parts geek and it was wrong, spoke to A1auto, they have nothing to fit a 4X4, no good info on rockAuto about twin I beam and you can't call them, Local places have nothing. Moogparts does not show the different parts for TWIN vs Mono beam, Napa has the right side like I need but its $450. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted August 25, 2023 Share Posted August 25, 2023 It's a Dana 50. The problem is the Twin I-beam suspension. I ordered from parts geek and it was wrong, spoke to A1auto, they have nothing to fit a 4X4, no good info on rockAuto about twin I beam and you can't call them, Local places have nothing. Moogparts does not show the different parts for TWIN vs Mono beam, Napa has the right side like I need but its $450. Have a look at this page from Jeff's Bronco Graveyard: https://shop.broncograveyard.com/F250-F350-4wd-Steering-Link/products/232/ They have inner, outer, center/drag & sleeves for '80-'85 250/350 TTB. ***in stock*** They also offer a complete 'kit' 32905. https://shop.broncograveyard.com/1980-85-F250-F350-Steering-Rod-Kit/productinfo/32905/ I can't say what brand, but Jeff's is very knowledgeable about suspension (that's where they started) I don't think they sell bad parts. I've bought Dana/Spicer, Eaton and Moog from them before. And they actually answer their phone if you have questions.... (link to kit directly) Link to comment Share on other sites More sharing options...
Recommended Posts