Littlebeefy Posted May 29, 2023 Share Posted May 29, 2023 Hi guys, I know some of you have used Sem Color Coat with a lot of success. I'm going through the whole ritual with the prep and the sand-free pretreat, etc. I'm actually getting a custom color of the SEM mixed and I'm wondering whether I should do the aerosol or the pint can. Anyone brush it on versus spray it on and, if so, would you recommend that? Thanks, Chad Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 29, 2023 Share Posted May 29, 2023 All I’ve done is spray. Works well, but prep is a must. Link to comment Share on other sites More sharing options...
FuzzFace2 Posted May 30, 2023 Share Posted May 30, 2023 All I’ve done is spray. Works well, but prep is a must. X2 If I was to get a pint can I would spray it on as I have the equipment. Dave ---- Link to comment Share on other sites More sharing options...
ckuske Posted May 30, 2023 Share Posted May 30, 2023 All I’ve done is spray. Works well, but prep is a must. X2 If I was to get a pint can I would spray it on as I have the equipment. Dave ---- I used a pint with a Preval spray head. I think it's much more economical to get the pint but with the Preval sprayer kit (they have them on Amazon) you have the best of both worlds. Link to comment Share on other sites More sharing options...
Recommended Posts