mat in tn Posted February 1 Share Posted February 1 That press will come in handy. I have the 20 ton version and it's a lot of press for the money. It had absolutely NO problems pressing the wheel bearings and retaining collars on Ford 9" axle shafts, and those things are extremely tight press fit. I have been using this same model press for a few years now and don't know how I got by without one. I only have one gripe. the seal between the body and the base of the jack used has a tendency to weep. it makes a bit of a mess, and I don't always remember to put rags under it. I do have it sitting on an old door mat in the shop though so that catches what I miss. Link to comment Share on other sites More sharing options...
ArdWrknTrk Posted February 1 Share Posted February 1 I have been using this same model press for a few years now and don't know how I got by without one. I only have one gripe. the seal between the body and the base of the jack used has a tendency to weep. it makes a bit of a mess, and I don't always remember to put rags under it. I do have it sitting on an old door mat in the shop though so that catches what I miss. Loctite PST.... (ask Gary.... It is made for this 'stuff') Link to comment Share on other sites More sharing options...
Recommended Posts