Rear slider gasket

classic Classic list List threaded Threaded
44 messages Options
123
Reply | Threaded
Open this post in threaded view
|

Re: Rear slider gasket

kramttocs
Administrator
Bill - where does the motor go on those? Vertical in the cab corner, horizontal on the floor beneath the window, or?
Scott
'Camano' 1986 F250 Supercab XLT Lariat 460/C6
'Chanute' 1980 F350 C&C 400/NP 435 - Gin Pole

But there ain't nothin' wrong with the radio
Reply | Threaded
Open this post in threaded view
|

Re: Rear slider gasket

delco1946
In reply to this post by delco1946
delco1946 wrote
Thought I would try to keep this all in one thread, but as an FYI I wanted to confirm something for the next person, especially since both Steele and Rubber the Right Way have updated/changed their websites to be less specific/informative.

I haven't installed it yet, but it appears the master weather-strip kit from RTRW for 1980-86 Ford Trucks will NOT kit a rear factory slider from 1980 or 1981 with the aluminum frame (I expected this). I am making an assumption that the wide gap faces outward into the cab frame with the longer lip on the exterior. this means the inward facing slit/gap is for the window, and is barely thinker than a normal pane of glass.
I may be eating my words. I stopped by the shop to drop off my weatherstrip and they already popped off the rear window. I looked at the factory slider and the outward aluminum perimeter pinches into a thin groove.....the approximate thickness of a pane of glass! So i'm not sure what the deal is with the thicker-edged factory slider

Carry on...
Christopher in Portland Or. 1981 F250 Ranger XLT 4x4 trailer special 351M, and auto C6
Reply | Threaded
Open this post in threaded view
|

Re: Rear slider gasket

kramttocs
Administrator
Forgot to grab this photo the other day.
Here is one from a later year that uses the thicker groove:


Scott
'Camano' 1986 F250 Supercab XLT Lariat 460/C6
'Chanute' 1980 F350 C&C 400/NP 435 - Gin Pole

But there ain't nothin' wrong with the radio
Reply | Threaded
Open this post in threaded view
|

Re: Rear slider gasket

Rembrant
kramttocs wrote
Forgot to grab this photo the other day.
Here is one from a later year that uses the thicker groove:
Yup, same as both of my 1995 and 1996 factory SRW.
1994 F150 4x2 Flareside. 5.0 w/MAF, 4R70W, stock.
1984 F150 4X2 Flareside. Mild 302 w/ 5spd. Sold.
1980 F150 4X4 Flareside. 300i6 w/ 5spd. Sold in 2021.
1980 F100 4X2 Flareside. 351w/2bbl w/NP435. Sold in 1995

123