Jump to content
Bullnose Forums

Manual Transmission boot


chucketn

Recommended Posts

Funny you ask, as mine is too - and I was just searching the web for one yesterday. I can't find any repros or anything for it. Was going to measure what I've got, and see if I can find an available sub from another vehicle or manufacturer that will work.
Link to comment
Share on other sites

Funny you ask, as mine is too - and I was just searching the web for one yesterday. I can't find any repros or anything for it. Was going to measure what I've got, and see if I can find an available sub from another vehicle or manufacturer that will work.

Same question Applies . . . Which Boot do you need ? :nabble_smiley_beam:

There are several different types of Boots and they are also; Year/Model/Transmission specific.

There may be a slight chance that the Boot you need is available NOS somewhere. :nabble_crossed-fingers-20-pixel_orig:

Link to comment
Share on other sites

Is this what you are looking for?

https://www.ebay.com/itm/266020016599

That Outer Floor Boot that 1986F1506 posted earlier is most likely: E0TZ-7277-A (Due to the centered lever hole)

Fits 1980/83 F-100-350 Bronco: T-18 Borg Warner and New Process.

There are two more outer boots. This one here:

boot_A.jpg.bc2df07ad84825e68e618f3ce7639365.jpg

https://www.ebay.com/itm/134327173394?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D245022%26meid%3D3713cedadc0d47ceafdd5e346724ee9e%26pid%3D101195%26rk%3D1%26rkt%3D12%26sd%3D266020016599%26itm%3D134327173394%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv11WebTrimmedV3MskuWithRevOptLambda85KnnRecallV1%26brand%3DFord&_trksid=p2047675.c101195.m1851&amdata=cksum%3A1343271733943713cedadc0d47ceafdd5e346724ee9e%7Cenc%3AAQAHAAABEPZqctS1aW2Gn1fMafrLrPa7%252BqLD2Pgo5GTgCDTJgIpBMBHaBHcFvdVGNBWeIytK8f1wzF%252BzxLGmD%252BVjC1jJCji2ZUJFxxHag%252BcqGUdwENPNQU7jHiRleKCSqMlWFxXDM2rSti%252FS%252B8nLCe%252FDZsZoYa%252BX3wxuf9TV9xse3QKlySfRLncwEJ4TV%252B0%252Fo3QE9MkXoJ%252FrA4L0TVlyYvidglSMt6WDTnE9KJ0wtYZqedDWiDQvGuOY6J91OGc%252FA6VQTNHItgM6A0RisxjQULhNv%252B7yOBZGcnwc3ptGRB45%252BlNHtlG7N6h4GQ68RvERehAMuKfZVQDJDSafhbGOTmwvxwdBIHfjKGDBBtU4e0uqvvMTxQ2Y%7Campid%3APL_CLK%7Cclp%3A2047675

is E0TZ-7277-E

Fits 1980/1983 F-U-100/350: Tremec/Clark 4 speed OD.

Fits 1980/1986 F-U-150/350: Transfer Case

Then there is this one:

Boot_B.jpg.6a2a3efb986093ec8ac8f68bb6a489cc.jpg

https://www.ebay.com/itm/134358924060?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D245022%26meid%3Df34c65059687404ab7b97311e36f8412%26pid%3D101112%26rk%3D1%26rkt%3D12%26sd%3D266020016599%26itm%3D134358924060%26pmt%3D0%26noa%3D1%26pg%3D2047675%26algv%3DDefaultOrganicWebV9BertRefreshRanker%26brand%3DFord&_trksid=p2047675.c101112.m1982

That is most likely: E3TZ-7277-C (Due to the offset lever hole)

Fits: 1984/1986 F-U150/350; ALL

Fits: 1983/1987 F-250/350 6.9L Diesel with T-19

Not all things fit 1980-1986 unfortunately, or without modification etc.

Then there are inner boots as well. Then there are clutch fork boots etc ... :nabble_smiley_happy: Those are more trans specific.

Link to comment
Share on other sites

That Outer Floor Boot that 1986F1506 posted earlier is most likely: E0TZ-7277-A (Due to the centered lever hole)

Fits 1980/83 F-100-350 Bronco: T-18 Borg Warner and New Process.

There are two more outer boots. This one here:

https://www.ebay.com/itm/134327173394?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D245022%26meid%3D3713cedadc0d47ceafdd5e346724ee9e%26pid%3D101195%26rk%3D1%26rkt%3D12%26sd%3D266020016599%26itm%3D134327173394%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv11WebTrimmedV3MskuWithRevOptLambda85KnnRecallV1%26brand%3DFord&_trksid=p2047675.c101195.m1851&amdata=cksum%3A1343271733943713cedadc0d47ceafdd5e346724ee9e%7Cenc%3AAQAHAAABEPZqctS1aW2Gn1fMafrLrPa7%252BqLD2Pgo5GTgCDTJgIpBMBHaBHcFvdVGNBWeIytK8f1wzF%252BzxLGmD%252BVjC1jJCji2ZUJFxxHag%252BcqGUdwENPNQU7jHiRleKCSqMlWFxXDM2rSti%252FS%252B8nLCe%252FDZsZoYa%252BX3wxuf9TV9xse3QKlySfRLncwEJ4TV%252B0%252Fo3QE9MkXoJ%252FrA4L0TVlyYvidglSMt6WDTnE9KJ0wtYZqedDWiDQvGuOY6J91OGc%252FA6VQTNHItgM6A0RisxjQULhNv%252B7yOBZGcnwc3ptGRB45%252BlNHtlG7N6h4GQ68RvERehAMuKfZVQDJDSafhbGOTmwvxwdBIHfjKGDBBtU4e0uqvvMTxQ2Y%7Campid%3APL_CLK%7Cclp%3A2047675

is E0TZ-7277-E

Fits 1980/1983 F-U-100/350: Tremec/Clark 4 speed OD.

Fits 1980/1986 F-U-150/350: Transfer Case

Then there is this one:

https://www.ebay.com/itm/134358924060?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D245022%26meid%3Df34c65059687404ab7b97311e36f8412%26pid%3D101112%26rk%3D1%26rkt%3D12%26sd%3D266020016599%26itm%3D134358924060%26pmt%3D0%26noa%3D1%26pg%3D2047675%26algv%3DDefaultOrganicWebV9BertRefreshRanker%26brand%3DFord&_trksid=p2047675.c101112.m1982

That is most likely: E3TZ-7277-C (Due to the offset lever hole)

Fits: 1984/1986 F-U150/350; ALL

Fits: 1983/1987 F-250/350 6.9L Diesel with T-19

Not all things fit 1980-1986 unfortunately, or without modification etc.

Then there are inner boots as well. Then there are clutch fork boots etc ... :nabble_smiley_happy: Those are more trans specific.

Mine is most likely the E3TZ-C (85 4-speed O/D, soon to be a T18).

 

Link to comment
Share on other sites

The floor shift boot that goes slips over the transmission shifter that mounts to the floor, on the inside of the cab.

I saw the ebay unit(s). The reason I was looking for an alternative as there has to be something available new that's a little cheaper than $60 for a used boot.

Link to comment
Share on other sites

×
×
  • Create New...