Gsmblue Posted January 2, 2023 Share Posted January 2, 2023 I was just about to tell you that I have a pair of the upper 2-hole ones you can have, but none of the lower 2-hole. Oh thank you! Let be double check the mirrors I have, but that would be great, the aftermarket mirrors are not good Link to comment Share on other sites More sharing options...
BigBrother-84 Posted January 2, 2023 Share Posted January 2, 2023 Where can you get the plastic spacer bits that the mounting bolts go through? Is this the right model? Dennis Carpenter has it. Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 2, 2023 Share Posted January 2, 2023 Where can you get the plastic spacer bits that the mounting bolts go through? Is this the right model? Dennis Carpenter has it. Jeff - I think that's for a Type 5 mirror, as you can see here: Documentation/Exterior/Exterior Mirrors. I think Deren has Type 9 mirrors, as shown in the pic below, and they have plastic pieces as shown in the red circle. Link to comment Share on other sites More sharing options...
Gsmblue Posted January 2, 2023 Share Posted January 2, 2023 Jeff - I think that's for a Type 5 mirror, as you can see here: Documentation/Exterior/Exterior Mirrors. I think Deren has Type 9 mirrors, as shown in the pic below, and they have plastic pieces as shown in the red circle. Gary, correct, type 9 mirrors. I will definitely take you up on the offer of the gaskets! Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 2, 2023 Share Posted January 2, 2023 Gary, correct, type 9 mirrors. I will definitely take you up on the offer of the gaskets! Deren - You are on, but you do realize I only have the top ones. Right? Send me your address via email and I'll get them out tomorrow. Link to comment Share on other sites More sharing options...
81-F150-Explorer Posted January 2, 2023 Share Posted January 2, 2023 I don't know about NOS either, but here are the PN's just in case: E0TZ-17724-A / 1,487 available at Dennis Carpenter. E0TZ-17724-B / 1 available at Dennis Carpenter. E0TZ-17724-C / 2 Available at NOS Parts LTD. Waxahachie Tx. (972) 937-2201 E0TZ-17724-D / (Lower 2 Hole) 2 Available at NOS Parts LTD. Waxahachie Tx. (972) 937-2201 None of the others are available anywhere. Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 2, 2023 Share Posted January 2, 2023 E0TZ-17724-A / 1,487 available at Dennis Carpenter. E0TZ-17724-B / 1 available at Dennis Carpenter. E0TZ-17724-C / 2 Available at NOS Parts LTD. Waxahachie Tx. (972) 937-2201 E0TZ-17724-D / (Lower 2 Hole) 2 Available at NOS Parts LTD. Waxahachie Tx. (972) 937-2201 None of the others are available anywhere. Thanks, Ralph, but let me see if I understand: E0TZ-17724-A / 1,487 available at Dennis Carpenter. For "Upper 3 holes 6 x 9 mirror" E0TZ-17724-B / 1 available at Dennis Carpenter. For "Lower 3 holes 6 x 9 mirror" E0TZ-17724-C / 2 Available at NOS Parts LTD. Waxahachie Tx. (972) 937-2201 For "Upper 2 holes 6 x 9 mirror —(black)" E0TZ-17724-D / (Lower 2 Hole) 2 Available at NOS Parts LTD. Waxahachie Tx. (972) 937-2201 For???? I don't find that number in the MPC. So none of the lower ones that Deren needs for his 2-hole mirrors are available. Right? I think we need someone to draw these up for 3D printing. Link to comment Share on other sites More sharing options...
81-F150-Explorer Posted January 2, 2023 Share Posted January 2, 2023 E0TZ-17724-D / (Lower 2 Hole) 2 Available at NOS Parts LTD. Waxahachie Tx. (972) 937-2201 For???? I don't find that number in the MPC. It's in the 1986 MPC. 1989 REV. Lower 2 hole 6x9, But it is Black. So none of the lower ones that Deren needs for his 2-hole mirrors are available. Right? I think we need someone to draw these up for 3D printing. Not if he needs the Argent ones. That is correct. Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 2, 2023 Share Posted January 2, 2023 E0TZ-17724-D / (Lower 2 Hole) 2 Available at NOS Parts LTD. Waxahachie Tx. (972) 937-2201 For???? I don't find that number in the MPC. It's in the 1986 MPC. 1989 REV. Lower 2 hole 6x9, But it is Black. So none of the lower ones that Deren needs for his 2-hole mirrors are available. Right? I think we need someone to draw these up for 3D printing. Not if he needs the Argent ones. That is correct. Ok, so E0TZ-D is black. That might work. And was taken out of the MPC. As for printing, I've read that ASA plastic used in 3D printing is pretty UV stable. Should be good for this application. Link to comment Share on other sites More sharing options...
81-F150-Explorer Posted January 2, 2023 Share Posted January 2, 2023 Ok, so E0TZ-D is black. That might work. And was taken out of the MPC. As for printing, I've read that ASA plastic used in 3D printing is pretty UV stable. Should be good for this application. A lot of part numbers were removed because they were either superseded by another part number, or they were obsoleted by or before the final printing. An example of this, Distributor Cap: 300/6 1977-83: F-E-U100/350: D7DZ-12106-A: Motorcraft# DH-367-DP / BLUE / RB: E3DZ-12106-A 1983-86: F-E-U150/350: E5DZ-12106-A: Motorcraft# DH-367-B / GRAY The Blue cap isn't in the final 1994 printing. Otherwise they are identical. I've been wanting to get the 1990/1999 MPC book to see what other part number revisions that might fit our trucks etc... Also the Medium Books that cover the F-600/900 might have some cab goodies etc ... Link to comment Share on other sites More sharing options...
Recommended Posts