Jump to content
Bullnose Forums

F600 F700 dash compatability


Recommended Posts

I don't know. I really though the whole thing swapped, but apparently not. Maybe you could buy one and find out?

Gary, you are correct. I was referring to the instrument bezel since that was what was linked.

Let me clarify what I know… the main hard plastic dash shell has no differences that I know of, but I think the lower metal supports for it above the transmission tunnel may be a little different if I’m remembering right.

The radio bezel fits and is interchangeable between the medium duty’s and the pickups.

The instrument bezel physically fits the hole in the dash shell of either truck, but the steering columns are in different places and therefore one won’t fit the other. The medium duty column is lower and shifted about an inch and a half to the left compared to the pickup column. The trim below the medium duty column can be adapted to a pickup, but won’t be centered.

E7F72808-8418-459C-9961-CAD9820684AF.jpeg.b51b89caba812dfe30cbaea313858505.jpeg

Medium duty^^^

16AAF288-80B1-475F-9479-97C57CC4692B.jpeg.94346c93eec13de0e7b19f687adf79c8.jpeg

Pickup^^^

99B461B9-C5E8-4A33-99AC-DB85744CDDD7.thumb.jpeg.5e6b7e935d695f82594f4264a5165109.jpeg

EC976B26-6868-4542-B662-0EF97335BFF3.thumb.jpeg.ca4492bfc6efb31a8716b8ef51438800.jpeg

003B2C3B-C061-4977-A16D-8295B2880579.thumb.jpeg.dcd06affde68c29940b221993b827c33.jpeg

Trent’s medium duty adaptation^^^

Greetings David! http://www.garysgaragemahal.com/uploads/6/5/8/7/65879365/waving_orig.gif

 

Link to comment
Share on other sites

Gary, you are correct. I was referring to the instrument bezel since that was what was linked.

Let me clarify what I know… the main hard plastic dash shell has no differences that I know of, but I think the lower metal supports for it above the transmission tunnel may be a little different if I’m remembering right.

The radio bezel fits and is interchangeable between the medium duty’s and the pickups.

The instrument bezel physically fits the hole in the dash shell of either truck, but the steering columns are in different places and therefore one won’t fit the other. The medium duty column is lower and shifted about an inch and a half to the left compared to the pickup column. The trim below the medium duty column can be adapted to a pickup, but won’t be centered.

Medium duty^^^

Pickup^^^

Trent’s medium duty adaptation^^^

Greetings David! :nabble_waving_orig:

Shaun - Thanks.

Jonathan - Those pics answer the question. Thanks a bunch! I can see a lot of difference where the column goes. :nabble_smiley_good:

Link to comment
Share on other sites

×
×
  • Create New...