Jump to content
Bullnose Forum

Reviving my 1985


betterthansquare

Recommended Posts

I will share my resto of the Bronco. I pulled the truck out of the desert after many years of sitting in a storage unit in Parker Arizona. Most of the windows are broken out. I have not found any mods done to the Bronco yet. (No wires grafted into anything, no cut wires, no aftermarket junk, nothing. Now it does have aftermarket wheels.)

It started it life in 75(Phoenix), which is located on the door jamb. It has 41K on the dash. I guy I bought it from, said that he got it from the original owner (an older gentleman), and he lived in Scottsdale at the time.

I have been wanting a 1985 Bronco because I love the look of the front end. Now here we go.

parker.jpg.3ba53a9468e969ea0b4182871f0b41a7.jpg

After I got the truck home, I started cleaning and evaluation what needs to be fixed.

Glass was a big first on the list.

front.jpg.3b9e8b925514e191c539f1227f278c6d.jpg

The rear and side and the front of the truck have had some glass damage.

new1.jpg.eb0a30e67231b6c2601ee3e226a7ca80.jpg

new2.jpg.a23cb172eebedff825db5a11ad93cbfc.jpg

So I bought the rear glass and the two side top glass and fixed that issue. I did remove the top glass from a top I bought and installed the glass into the original top. it was not that hard to do. I will say, the glass I used is from a 1996 Bronco and the glass and rubber fit the 1985 perfectly.

Link to comment
Share on other sites

×
×
  • Create New...