Rembrant Posted May 29, 2022 Share Posted May 29, 2022 :nabble_anim_claps::nabble_anim_claps: Agreed. Well done gents. Link to comment Share on other sites More sharing options...
BigBrother-84 Posted May 29, 2022 Author Share Posted May 29, 2022 I will give these to you, just tell me how to ship them. I assume shipping across the border isn't cheap! Do you want just the two rubber parts, or would you like the top plate too? No use to me, yours if you want, just get the shipping. I'm in Battle Creek Michigan 49017 Hi Curt, Thanks so much for your proposal! I tried to send you my complete coordinates, but the forum email does not seem to work. So, Gary will send you my email address. Please send me an email using it, and we'll be able to exchange required informations that way. Thanks again! Link to comment Share on other sites More sharing options...
Slim_Lindsey Posted June 29, 2022 Share Posted June 29, 2022 I'm in a bit of bind trying to find these bushings myself. Does anyone know if there is a conversion that is done to get around needing to find these? I'd prefer to have the bushings but with how hard they are to find I think I might prefer to go a route that will be easier to maintain in the future. Thanks! Link to comment Share on other sites More sharing options...
Gary Lewis Posted June 29, 2022 Share Posted June 29, 2022 I'm in a bit of bind trying to find these bushings myself. Does anyone know if there is a conversion that is done to get around needing to find these? I'd prefer to have the bushings but with how hard they are to find I think I might prefer to go a route that will be easier to maintain in the future. Thanks! Slim - Welcome to the forum! You probably missed the email you were sent asking you to make your first post an introduction in the New Members Start Here folder. The reason we ask that is two fold. First, we are a community and we want to get to know each other. But second, we have the guidelines posted in that folder and we hold everyone to them so want to ensure you have a chance to read them. So, can you assure me that you have read them? Link to comment Share on other sites More sharing options...
BigBrother-84 Posted June 30, 2022 Author Share Posted June 30, 2022 I'm in a bit of bind trying to find these bushings myself. Does anyone know if there is a conversion that is done to get around needing to find these? I'd prefer to have the bushings but with how hard they are to find I think I might prefer to go a route that will be easier to maintain in the future. Thanks! Hi Slim, welcome in the family (yep, this community acts such as!). I had the chance that Curt had good condition ones to offer. Otherwise, there is one new on eBay (just one and not cheap). E1TZ-6E039-A. https://www.cafr.ebay.ca/itm/324684521374 I suppose someone with big budget and patience could find a second new OEM one. Link to comment Share on other sites More sharing options...
BigBrother-84 Posted September 12, 2022 Author Share Posted September 12, 2022 I will give these to you, just tell me how to ship them. I assume shipping across the border isn't cheap! Do you want just the two rubber parts, or would you like the top plate too? No use to me, yours if you want, just get the shipping. I'm in Battle Creek Michigan 49017 Curt, Crossmember installed! Again, many thanks! Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 12, 2022 Share Posted September 12, 2022 Curt, Crossmember installed! Again, many thanks! Well done, both of you! Link to comment Share on other sites More sharing options...
Snowpony Posted September 12, 2022 Share Posted September 12, 2022 Curt, Crossmember installed! Again, many thanks! Oh good! I was hoping it was what you could use, I am truly happy for you! It was a good experience on my end, thank you! Curt Link to comment Share on other sites More sharing options...
Slim_Lindsey Posted July 30, 2023 Share Posted July 30, 2023 Slim - Welcome to the forum! You probably missed the email you were sent asking you to make your first post an introduction in the New Members Start Here folder. The reason we ask that is two fold. First, we are a community and we want to get to know each other. But second, we have the guidelines posted in that folder and we hold everyone to them so want to ensure you have a chance to read them. So, can you assure me that you have read them? Way late on this reply, Sorry Gary! I read the guide lines and just posted in the new members section! Link to comment Share on other sites More sharing options...
Gary Lewis Posted July 30, 2023 Share Posted July 30, 2023 Way late on this reply, Sorry Gary! I read the guide lines and just posted in the new members section! Thanks, Slim. You are good to go. Link to comment Share on other sites More sharing options...
Recommended Posts