Anyone know p/n for front wheel bearings and seal. Dana 44HD

[CountryBumkin]

I need to replace front wheel bearings and wheel seal on my 82 F250 4x4 with Dana 44HD front axle.

Looking through some on-line parts stores, there are a lot of choices but I don't trust the brands I haven't heard of before.

I did find a Timken catalog online that shows the bearing sets I need are:

Front Inner p/n "SET37" (a LM603011 cup and LM603049 cone)

Front Outer p/n "SET45" (a LM501310 cup and LM501349 cone)

Seal 4250.

This sounds correct. If anyone has other info, please post, otherwise I'll order this.

Thanks

[Gary Lewis]

I don't know Timken or other part numbers, but perhaps the Ford #'s will help.

First, you have to find your axle's parts list number, and I make that out to be #14.

And here is #14's list of parts. (Don't ask what 8A 1202 means. I don't know.)

I'll see if I can't get this put up on the website.

[Gary Lewis]

I don't know Timken or other part numbers, but perhaps the Ford #'s will help.

First, you have to find your axle's parts list number, and I make that out to be #14.

And here is #14's list of parts. (Don't ask what 8A 1202 means. I don't know.)

I'll see if I can't get this put up on the website.

Ok, the info is up on Driveline/4WD Front Hubs & Rotors.

[CountryBumkin]

Ok, the info is up on Driveline/4WD Front Hubs & Rotors.

Thanks!