Rembrant Posted January 29, 2022 Share Posted January 29, 2022 Welcome aboard! I'm a big fan of the 5spd swap in a Bullnose truck. It's almost all plug N play, and it's a welcome addition. I've spent a lot of time in NH. We used to hit Laconia Bike Week every year, and have been to the top of Mt. Washington a half a dozen times as well. Link to comment Share on other sites More sharing options...
Megiddo Posted January 29, 2022 Author Share Posted January 29, 2022 Welcome aboard! I'm a big fan of the 5spd swap in a Bullnose truck. It's almost all plug N play, and it's a welcome addition. I've spent a lot of time in NH. We used to hit Laconia Bike Week every year, and have been to the top of Mt. Washington a half a dozen times as well. My wife definitely wouldn't ride in Megiddo to the top of Mt. Washington! I got a lot of good advice on the old forum for the ZF5 swap. The only thing I worried about was moving the crossmember back 2 inches. I had the holes on the upper brackets slotted out so I could put the front bolt in the back frame hole and drill fewer new holes.. There is a local shop that cut my rear drive shaft down. I found a longer front shaft from an '89 in the junk yard. Link to comment Share on other sites More sharing options...
Recommended Posts