Jump to content
Bullnose Forums

84 f250 ?


Recommended Posts

All good info guys! I did a little digging and came up with the info that the 351 had the t18 and the 460 would have had a t19. T18 had a non synchro 1st granny 6.32:1 ratio to compensate for the lack of power for the 351. While the t18 had a synchronized 1st gear of 4:1 which really isn't a granny low.

I'm thinking my truck has a t19 because 1st is all but useless for normal driving. While researching this I could out my reverse ratio is 7.44:1 which makes it incredible slow in reverse while plowing lol.

I meant that I believe I have a t18...

Link to comment
Share on other sites

I meant that I believe I have a t18...

Yes, you should have a T18.

As for the 1st gear ratio, don't believe everything you read on the internet. I prefer to believe factory documentation, and I have some on this site that says the CA-spec 460's with a T-19 got 5.11 first gears and the 49-state trucks got 6.32 first gears.

Check out the whole of this thread: http://forum.garysgaragemahal.com/No-headaches-6-9-Diesel-td9311i20.html. Or, go through the Powertrains tab on the 1983 Ford Light Trucks Facts Book.

 

Link to comment
Share on other sites

Yes, you should have a T18.

As for the 1st gear ratio, don't believe everything you read on the internet. I prefer to believe factory documentation, and I have some on this site that says the CA-spec 460's with a T-19 got 5.11 first gears and the 49-state trucks got 6.32 first gears.

Check out the whole of this thread: http://forum.garysgaragemahal.com/No-headaches-6-9-Diesel-td9311i20.html. Or, go through the Powertrains tab on the 1983 Ford Light Trucks Facts Book.

Thanks for that Gary! Here is a link where I got the info incase your interested.

http://www.novak-adapt.com/knowledge/transmissions/manual/t18-t19

Not that it probably matters but I have a Canadian built truck..

Link to comment
Share on other sites

Thanks for that Gary! Here is a link where I got the info incase your interested.

http://www.novak-adapt.com/knowledge/transmissions/manual/t18-t19

Not that it probably matters but I have a Canadian built truck..

Yes, if you read that thread that's the site that Jonathan sent me to. However, it doesn't fit with Ford's publications, so I believe Ford.

Link to comment
Share on other sites

×
×
  • Create New...