1986F150Six Posted November 2, 2021 Share Posted November 2, 2021 My blend door didn't need repair so I only had to deal with replacing the foam on 'flat' doors. I am not sure of a good solution to making new foam that has the same profile as this one. Open cell spray foam applied and then cut to form, maybe? Gary - did you say you had to repair this one? This may be a rabbit trail [slightly off topic], as it is not the part the original poster is looking for, but this information [mentioned some time back in another similar topic thread] may be helpful: https://www.detroitmuscletechnologies.com/ford-80-86-pickup-truck-f150-f250-bronco-ac-heater-box-rebuild-seal-kit/?gclid=Cj0KCQjww4OMBhCUARIsAILndv4oP_9ulrPbrTJcmHioB4G8shZ2SfEEk5tsEIxl_ExHiW5TcCgoCZgaAncEEALw_wcB Link to comment Share on other sites More sharing options...
1986F150Six Posted November 2, 2021 Share Posted November 2, 2021 This may be a rabbit trail [slightly off topic], as it is not the part the original poster is looking for, but this information [mentioned some time back in another similar topic thread] may be helpful: https://www.detroitmuscletechnologies.com/ford-80-86-pickup-truck-f150-f250-bronco-ac-heater-box-rebuild-seal-kit/?gclid=Cj0KCQjww4OMBhCUARIsAILndv4oP_9ulrPbrTJcmHioB4G8shZ2SfEEk5tsEIxl_ExHiW5TcCgoCZgaAncEEALw_wcB If the blend door needs replacing, see if this helps: https://shop.broncograveyard.com/1980-1986-Ford-Bronco-and-F-Series-Truck-Heater-Blend-Door/productinfo/37282/ Link to comment Share on other sites More sharing options...
kramttocs Posted November 2, 2021 Share Posted November 2, 2021 If the blend door needs replacing, see if this helps: https://shop.broncograveyard.com/1980-1986-Ford-Bronco-and-F-Series-Truck-Heater-Blend-Door/productinfo/37282/ Thanks David! I forgot that JBG offered the door with new foam. Appears to slip on? Double sided tape inside perhaps? I don't see staples. Note that they are calling that the 'blend' door instead of the 'panel' or commonly called 'vent' door. Link to comment Share on other sites More sharing options...
Recommended Posts