calvinhg Posted September 26, 2021 Share Posted September 26, 2021 Hey y'all! I'm Calvin. Just joined, I'll be posting my conversion thread from 97 OBS front clip to 86 front clip. Here is my first truck, Spartacus: It's got the 7.3 PSD, a 5" (?) RSK lift, zf5, SD seats, a bunch of cool things I did to it. But I ran off the road in May, swiped a pole and dented the cab pretty bad. The bed is also tore up. But that's OK, I have this guy! Partacus, 86 f250 lariat with a 6.9 and c6, from Washington with a blown engine. PO bought it, drove it down to Texas, forgot to check the oil. So I got it for cheap! The plan is to swap the bed and front clip over. And for the messed up cab, we have a donor 93 f350 from which we already took engine and trans for another truck. That's where the body shop comes in. Finally, I have Roadrunner, a 96 f250 with a 7.3 and an e40d, 4wd. Was gonna be a parts truck for Spartacus, but turned out it only needed injector o-rings. Currently my daily driver. That's it! Nice to meet y'all! Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 26, 2021 Share Posted September 26, 2021 Hello, and welcome! Particus? I think I've heard of him. Washington to Tejas w/o oil, sounds familiar. So I think I know who you are. You'll surely want to start a thread in the main section to track your progress, and I look forward to it. Link to comment Share on other sites More sharing options...
grumpin Posted September 26, 2021 Share Posted September 26, 2021 Hello, and welcome! Particus? I think I've heard of him. Washington to Tejas w/o oil, sounds familiar. So I think I know who you are. You'll surely want to start a thread in the main section to track your progress, and I look forward to it. Welcome! Link to comment Share on other sites More sharing options...
Recommended Posts