ARM Ashby Posted September 9, 2021 Share Posted September 9, 2021 With the switch I listed, Chrysler 2.2L carbureted engines it keeps the idiot light if used, and powers the choke without using a relay. It will even work on a 2G alternator or a 1G. I have a 3G 130 amp on my 86 F350 7.5 I used the white/black wire off the alternator just like the stock 1 G. This 7.5 volts. It will also run a 12 volt choke coil. Link to comment Share on other sites More sharing options...
Jesse3877 Posted September 14, 2021 Share Posted September 14, 2021 I have an edelbrock carb with electric choke. I used a add-a-circuit at the radio fuse and ran wire through existing hole in firewall. Works just fine but was considering using my stator terminal on 1G alternator, even though edelbrock says not to, so I can hide the wire easier. Link to comment Share on other sites More sharing options...
Recommended Posts