BLES Posted August 17, 2021 Share Posted August 17, 2021 I have a 1983 F100 that originally had a 300-6. Now I'm running a big block and a rad for a 460/F350. The rad bolts right in using the alternate (unused with 300-6) factory holes. My question is regarding the hole for the actual rad in the support. The larger rad fits nice, but the opening is about 6" too narrow. The original rad fit the opening perfect, but the extra width of the bigger rad is covered from airflow. Since the bolts holes are there for the larger rad, I assumed that's the only change, but now I'm wondering if there is a different support that also has the larger core opening for air flow through the entire rad.?? Current opening (and original core) is about 22" wide vs 28" wide for the larger F350 rad. Thanks. Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 17, 2021 Share Posted August 17, 2021 See if the comment on the first row of this snippet from the Master Parts Catalog, from our page at Documentation/Cooling System/Radiator Support, doesn't answer the question: Link to comment Share on other sites More sharing options...
BLES Posted August 17, 2021 Author Share Posted August 17, 2021 See if the comment on the first row of this snippet from the Master Parts Catalog, from our page at Documentation/Cooling System/Radiator Support, doesn't answer the question: Thanks Gary! I can't say I totally understand that, but it seems I should just go ahead and cut it out. That was my plan, until I got wondering if there was something that wouldn't look "cut out" afterward. I sure appreciate the knowledge you (and others) share. I have likely come across this in the past, but I would have been looking a while to find it again. Thanks again for bailing me out. Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 17, 2021 Share Posted August 17, 2021 Thanks Gary! I can't say I totally understand that, but it seems I should just go ahead and cut it out. That was my plan, until I got wondering if there was something that wouldn't look "cut out" afterward. I sure appreciate the knowledge you (and others) share. I have likely come across this in the past, but I would have been looking a while to find it again. Thanks again for bailing me out. I know where I hid the bodies. Link to comment Share on other sites More sharing options...
Recommended Posts