kramttocs Posted August 9, 2021 Share Posted August 9, 2021 Anyone know a place to purchase this plastic piece that goes into the trim itself? Been watching LMC for a year and they seem to always be out. Plus shipping is more than a handful of these are. Probably should just reuse the old at this point but would like to find fresh. LMC: 40-1665 Link to comment Share on other sites More sharing options...
1986F150Six Posted August 9, 2021 Share Posted August 9, 2021 Scott, do you know the engineering number? The LMC picture seems somewhat generic and I am not sure if "D" is a screw or fastener? https://www.ebay.com/itm/143508492026?epid=1964635013&hash=item2169c5cefa:g:IzwAAOSwdb5eJ37v Link to comment Share on other sites More sharing options...
1986F150Six Posted August 9, 2021 Share Posted August 9, 2021 Scott, do you know the engineering number? The LMC picture seems somewhat generic and I am not sure if "D" is a screw or fastener? https://www.ebay.com/itm/143508492026?epid=1964635013&hash=item2169c5cefa:g:IzwAAOSwdb5eJ37v If, by chance, that is the part, Dennis Carpenter has some: https://www.dennis-carpenter.com/trucks/exterior/body-mouldings/e0tz-1021066-a-molding-retainer-plastic Link to comment Share on other sites More sharing options...
1986F150Six Posted August 9, 2021 Share Posted August 9, 2021 If, by chance, that is the part, Dennis Carpenter has some: https://www.dennis-carpenter.com/trucks/exterior/body-mouldings/e0tz-1021066-a-molding-retainer-plastic Bronco Graveyard, too: https://shop.broncograveyard.com/1980-1985-Ford-Bronco-and-F-Series-Truck-Moulding-Clip-Upper-Door/productinfo/35199A/ Link to comment Share on other sites More sharing options...
kramttocs Posted August 9, 2021 Author Share Posted August 9, 2021 Scott, do you know the engineering number? The LMC picture seems somewhat generic and I am not sure if "D" is a screw or fastener? https://www.ebay.com/itm/143508492026?epid=1964635013&hash=item2169c5cefa:g:IzwAAOSwdb5eJ37v Thanks for checking on this. Sadly I haven't been able to find an eng number. Have looked through the 'R' fastener reference, called LMC to see if they had a cross reference, checked with ebay sellers, performed various other online searches but no luck. This one is similar to the yellowish ones you found but instead of a hole for the pop rivet, these have a prong that goes into the truck similar to the over-the-wheelwell trim. Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 9, 2021 Share Posted August 9, 2021 Thanks for checking on this. Sadly I haven't been able to find an eng number. Have looked through the 'R' fastener reference, called LMC to see if they had a cross reference, checked with ebay sellers, performed various other online searches but no luck. This one is similar to the yellowish ones you found but instead of a hole for the pop rivet, these have a prong that goes into the truck similar to the over-the-wheelwell trim. Scott - Have you tried to find them via the part number? You probably know, but to do that you have to come up with the two-character code for the retainer and then turn that code into the part number on our page at Documentation/Exterior/EXTERIOR MOULDING RETAINERS And you can get the code on the drawing below: Link to comment Share on other sites More sharing options...
kramttocs Posted August 10, 2021 Author Share Posted August 10, 2021 Scott - Have you tried to find them via the part number? You probably know, but to do that you have to come up with the two-character code for the retainer and then turn that code into the part number on our page at Documentation/Exterior/EXTERIOR MOULDING RETAINERS And you can get the code on the drawing below: Thanks Gary. That's the R doc I had checked and is extremely useful. Really thought it would have them. I'll check again tomorrow but all the photos I found for the numbers were the truck side of the molding. Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 10, 2021 Share Posted August 10, 2021 Thanks Gary. That's the R doc I had checked and is extremely useful. Really thought it would have them. I'll check again tomorrow but all the photos I found for the numbers were the truck side of the molding. It is just 6:30ish and I've not had even a sip of my coffee, so I have an excuse. But I don't understand "the truck side of the molding". Link to comment Share on other sites More sharing options...
kramttocs Posted August 16, 2021 Author Share Posted August 16, 2021 It is just 6:30ish and I've not had even a sip of my coffee, so I have an excuse. But I don't understand "the truck side of the molding". Sorry, I meant truck side of the retainer. Meaning that I kept finding pictures of the barrel nuts. Looks like my problem was trying to do this all on my phone. Once I got to the pc and viewed the documentation I found this is (LB) = e0tz-9929033-a Dennis Carpenter has a lot of them. Thanks! Link to comment Share on other sites More sharing options...
Gary Lewis Posted August 16, 2021 Share Posted August 16, 2021 Sorry, I meant truck side of the retainer. Meaning that I kept finding pictures of the barrel nuts. Looks like my problem was trying to do this all on my phone. Once I got to the pc and viewed the documentation I found this is (LB) = e0tz-9929033-a Dennis Carpenter has a lot of them. Thanks! Glad you found them. Link to comment Share on other sites More sharing options...
Recommended Posts