Cinamon Posted May 31, 2018 Share Posted May 31, 2018 Hi there, New to all of this, hoping I can get this right,. I have a 1981 Bronco, mostly exterior restored looking for interior parts if anyone can help. Thanks Link to comment Share on other sites More sharing options...
1986F150Six Posted May 31, 2018 Share Posted May 31, 2018 Welcome! Make a list of desired parts and maybe you will find what you need. Or better yet, join us at the Garagemahal International and Domestic Meet in Sept. There will be a parts swap/sell area. Link to comment Share on other sites More sharing options...
Cinamon Posted May 31, 2018 Author Share Posted May 31, 2018 Welcome! Make a list of desired parts and maybe you will find what you need. Or better yet, join us at the Garagemahal International and Domestic Meet in Sept. There will be a parts swap/sell area. Thankyou, can you give me more info of where I may find the swap meet? I am from Vancouver island in British Columbia Canada. I do have an address in Washington state I can ship to if I find parts. I’m looking for manual door latch, door panels, I’m looking for the vinyl and the fabric to replace my worn seats , also the cross member under the carriage of the truck, it had a propane system in it at one time and now I’m converting it back to gas again , but I need the cross member, it was taken out to put a propane tank in the truck. And if anyone knows of where I may find the plastic interior covers for the canopy when it it on the truck, part of one of mine is cracked and broken. .thanks for all anyone can help with..sometimes frustrating finding parts.. Link to comment Share on other sites More sharing options...
1986F150Six Posted May 31, 2018 Share Posted May 31, 2018 Thankyou, can you give me more info of where I may find the swap meet? I am from Vancouver island in British Columbia Canada. I do have an address in Washington state I can ship to if I find parts. I’m looking for manual door latch, door panels, I’m looking for the vinyl and the fabric to replace my worn seats , also the cross member under the carriage of the truck, it had a propane system in it at one time and now I’m converting it back to gas again , but I need the cross member, it was taken out to put a propane tank in the truck. And if anyone knows of where I may find the plastic interior covers for the canopy when it it on the truck, part of one of mine is cracked and broken. .thanks for all anyone can help with..sometimes frustrating finding parts.. The meet will be in Skiatook, OK. SMS Fabrics will likely have the original fabric, you desire. https://smsautofabrics.com/ https://www.ebay.com/itm/NOS-OEM-Ford-1980-1986-Truck-Pickup-Door-Panel-Bronco-1981-1982-1983-1984-1985-O/122389950881?epid=591050982&hash=item1c7f0271a1:g:XmcAAOSwCU1YtLZn https://www.ebay.com/itm/NOS-OEM-Ford-1980-1986-Truck-Pickup-Door-Panel-Bronco-1981-1982-1983-1984-1985-B/401479755898?epid=10012718280&hash=item5d7a0ee87a:g:0~4AAOSwp7FaU~3O https://www.ebay.com/itm/NOS-OEM-Ford-1980-1986-Truck-Pickup-Door-Panel-Bronco-1981-1982-1983-1984-1985-R/142221171692?hash=item211d0adbec:g:Gw8AAOSw44BYUxQQ Used door panels are also available as well as after market [non-OEM]. Look at the 2018 Garagemahal Truck Show Planning thread. Link to comment Share on other sites More sharing options...
Cinamon Posted May 31, 2018 Author Share Posted May 31, 2018 The meet will be in Skiatook, OK. SMS Fabrics will likely have the original fabric, you desire. https://smsautofabrics.com/ https://www.ebay.com/itm/NOS-OEM-Ford-1980-1986-Truck-Pickup-Door-Panel-Bronco-1981-1982-1983-1984-1985-O/122389950881?epid=591050982&hash=item1c7f0271a1:g:XmcAAOSwCU1YtLZn https://www.ebay.com/itm/NOS-OEM-Ford-1980-1986-Truck-Pickup-Door-Panel-Bronco-1981-1982-1983-1984-1985-B/401479755898?epid=10012718280&hash=item5d7a0ee87a:g:0~4AAOSwp7FaU~3O https://www.ebay.com/itm/NOS-OEM-Ford-1980-1986-Truck-Pickup-Door-Panel-Bronco-1981-1982-1983-1984-1985-R/142221171692?hash=item211d0adbec:g:Gw8AAOSw44BYUxQQ Used door panels are also available as well as after market [non-OEM]. Look at the 2018 Garagemahal Truck Show Planning thread. Thanks for the tip, my door panels are rough but I can paint them I really would like the manual door locks if I can find them , I have the drivers side just not the passenger side lock.. And thanks for the tip on the fabric and vinyl they do have what I’m looking for .😊 Link to comment Share on other sites More sharing options...
1986F150Six Posted May 31, 2018 Share Posted May 31, 2018 Thanks for the tip, my door panels are rough but I can paint them I really would like the manual door locks if I can find them , I have the drivers side just not the passenger side lock.. And thanks for the tip on the fabric and vinyl they do have what I’m looking for .😊 Slide locks? Link to comment Share on other sites More sharing options...
Cinamon Posted May 31, 2018 Author Share Posted May 31, 2018 Slide locks?The manual door lock as seen in this pic, but I’m missing the passenger side one . It’s a manual slide door lock. Thanks for your help. On May 31, 2018, at 8:02 AM, 1986F150Six [via Bullnose Enthusiasts] <redacted_email_address> wrote: Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 31, 2018 Share Posted May 31, 2018 If you are just needing the visible parts, let me look to see what I have. But I can’t look until maybe tomorrow. Also, I think I have a pair of door panels you can have that have the slide lock cutouts. Don’t remember how good they are, but will look. Link to comment Share on other sites More sharing options...
1986F150Six Posted May 31, 2018 Share Posted May 31, 2018 I believe these are side specific [driver's side or passenger side], so be careful. https://www.ebay.com/itm/Ford-OEM-NOS-E0TZ-1022169-H-Door-Lock-Control-Slide-Button-Blue-LH-F-150-250-350/152972517736?epid=1422263646&hash=item239ddf6168:g:1KoAAOSwE0ZaxkEX https://www.ebay.com/itm/FORD-CONTROL-DR-LOCK-E0TZ-1022168-L/272922783378?epid=1111231182&hash=item3f8b772e92:g:8agAAOSwc6paBLr2:sc:USPSFirstClass!35660!US!-1 no photo: https://www.amazon.com/Ford-EOTZ1022169H-Control/dp/B01EO4080E As a side note, you can convert to the later style of push-button locks. Link to comment Share on other sites More sharing options...
Cinamon Posted May 31, 2018 Author Share Posted May 31, 2018 If you are just needing the visible parts, let me look to see what I have. But I can’t look until maybe tomorrow. Also, I think I have a pair of door panels you can have that have the slide lock cutouts. Don’t remember how good they are, but will look. Oh wow that would be amazing, thankyou so much,,!!! 😊 Sent from my iPad On May 31, 2018, at 8:42 AM, Gary Lewis [via Bullnose Enthusiasts] <redacted_email_address> wrote: Link to comment Share on other sites More sharing options...
Recommended Posts