Interior rear quarter panel retaining/mounting blocks

[Gsmblue]

Is there a source for the small white blocks that are used for fixing the interior rear quarter panels to the body? I have a number of broken ones.

I know the local breakers yard is an option, but I am not sure I am going to find all I need there. I am not even sure I am calling them the right name.

[Gary Lewis]

Looking our page on Documentation/Interior/Interior Trim it looks like that is base PN 27880. And the MPC says that it is a "RETAINER (BODY REAR CORNER PANEL TRIM)" and the Nylon ones are E0TZ 1027880-A.

Unfortunately I don't see it in the Auveco catalog nor the Standard & Utility Parts Catalog. So I did a Google search and these are the few results: https://www.google.com/search?q=E0TZ+1027880-A&rlz=1C1SQJL_enUS884US884&sxsrf=ALeKk01yUTKG71vLbrG3vWRcYguuk0dtUw:1626791330331&source=lnt&tbs=li:1&sa=X&ved=2ahUKEwj3qvj67fHxAhUXrJ4KHUxNCt4QpwV6BAgBECs&biw=1600&bih=757

[Gsmblue]

Looking our page on Documentation/Interior/Interior Trim it looks like that is base PN 27880. And the MPC says that it is a "RETAINER (BODY REAR CORNER PANEL TRIM)" and the Nylon ones are E0TZ 1027880-A.

Unfortunately I don't see it in the Auveco catalog nor the Standard & Utility Parts Catalog. So I did a Google search and these are the few results: https://www.google.com/search?q=E0TZ+1027880-A&rlz=1C1SQJL_enUS884US884&sxsrf=ALeKk01yUTKG71vLbrG3vWRcYguuk0dtUw:1626791330331&source=lnt&tbs=li:1&sa=X&ved=2ahUKEwj3qvj67fHxAhUXrJ4KHUxNCt4QpwV6BAgBECs&biw=1600&bih=757

Thanks Gary!!!

[Gsmblue]

Thanks Gary!!!

I have purchased that part. Was not cheap, $14 for a plastic block and I need 3 more..

My friend in Portland has a 3D printer and reckons he can scan this part and print me some up... it will take some time but if it comes off I will post here just for fun.