Volker_81_F100XLT Posted July 18, 2021 Share Posted July 18, 2021 Hi everyone, I have a 81 F100 Ranger (2WD) with die original 15 x 6.0JK rims and 235/75 r15 tires on it. I would like to swap to 33x10.5r15s because I like the look with the higher tire wall. Does anybody have experience with that tire size? Do they finally fit on my 15 x 6.0JK rims and on the Truck without rubbing? Every advise or pictures would be really appreciated. Thanks best Regards Volker Link to comment Share on other sites More sharing options...
Machspeed Posted July 18, 2021 Share Posted July 18, 2021 Those may be a little too tall and will likely rub in tight turns. I am considering 31's on my 86 f150 4x4 and I've read that they may rub. Some of this has to do with the wheel offset though. Link to comment Share on other sites More sharing options...
Volker_81_F100XLT Posted July 18, 2021 Author Share Posted July 18, 2021 Those may be a little too tall and will likely rub in tight turns. I am considering 31's on my 86 f150 4x4 and I've read that they may rub. Some of this has to do with the wheel offset though. Hi, I was told that 31x10.5r15 are more thight on the chassis than 33x10.5r15. I was also considering buying 16 x 7 inch Rims, but my F100 has 5lug and the original Ford Rims in 16inch have 8lug. If I could put 16inch on, I would consider 255/85 R16 tires. But there are no Ford steel wheels with 5 holes. Best Regards Volker Link to comment Share on other sites More sharing options...
Recommended Posts