Jump to content
Bullnose Forums

I need help with a 1987 ford e350 7.5l


Recommended Posts

Here... https://www.ebay.com/itm/NOS-Ford-D3DZ-12A091-B-1973-76-Ford-Gran-Torino-Ranchero-Spark-Delay-Valve-/265117113510?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

Exact physical match for yours, and half the price of the other.

As I said, application charts are not gospel.

They are not even close sometimes, either.....

Here is probably what everything looked like:

IMGP0906.thumb.jpg.66d49ba066e4254fc5efad9ed81f834f.jpg

In the middle you can see where two of the lines have pieces repaired. This is where the lines passed over the heat riser passage and were burned by the heat. I lifted them up into a clip on the center inboard valve cover bolt. You should have a label like this:

Emission_label1.thumb.jpg.d03b414d4d5bef1663356368eb929355.jpg

It is on the radiator panel on pickups and probably the underside of the hood on E-series.

Check the "incomplete vehicle" label on the door post for the exact year of the chassis as it can be 1 - 2 years older than a motorhome.

Link to comment
Share on other sites

×
×
  • Create New...