Gsmblue Posted June 16, 2021 Share Posted June 16, 2021 Side my side of my new and old steering columns. The shaft at the bottom of the column on the “new” one is inset to the shroud and i am wondering if there is a trick to liberating it or if i am dealing with a damaged column or something else?? Any ideas? Link to comment Share on other sites More sharing options...
Gsmblue Posted June 16, 2021 Author Share Posted June 16, 2021 oops, was supposed to post this in the general forum.. sorry.. can a mod please move?? Link to comment Share on other sites More sharing options...
Gary Lewis Posted June 16, 2021 Share Posted June 16, 2021 oops, was supposed to post this in the general forum.. sorry.. can a mod please move?? Moved. And the shaft should pull out like the other one. At least mine have. Link to comment Share on other sites More sharing options...
Gsmblue Posted June 16, 2021 Author Share Posted June 16, 2021 Moved. And the shaft should pull out like the other one. At least mine have. Thanks Gary. I found the steering column page and saw that there should be some movement. So I removed the screws holding the plastic end cap in place, removed it and sprayed some WD40 in. I have to take the dog to the vet, when I get back I will wiggle it. Just a little bit ;) Link to comment Share on other sites More sharing options...
Gsmblue Posted June 16, 2021 Author Share Posted June 16, 2021 Thanks Gary. I found the steering column page and saw that there should be some movement. So I removed the screws holding the plastic end cap in place, removed it and sprayed some WD40 in. I have to take the dog to the vet, when I get back I will wiggle it. Just a little bit ;) And it is free! Thanks Gary! Link to comment Share on other sites More sharing options...
Gary Lewis Posted June 17, 2021 Share Posted June 17, 2021 And it is free! Thanks Gary! Link to comment Share on other sites More sharing options...
Rembrant Posted June 17, 2021 Share Posted June 17, 2021 ...I will wiggle it. Just a little bit ;) From my highschool graduation year (1990) LOL: Link to comment Share on other sites More sharing options...
Recommended Posts