Dawson81 Posted June 14, 2021 Share Posted June 14, 2021 So I’ve done a few things since I posted last a couple out of necessity I’m now running an electric fuel pump Due to my fan coming off and busting my radiator and in the process destroying my front cover and water pump I had a timing cover For a non mechanical fuel pump laying around but got a Weiand performance water pump I haven’t really noticed any difference but my it sure is pretty, also ran new parking brake cables and redid every last bit of the brake system which I’m now regretting because I just ordered braided stainless brake hoses with my lift kit I’m going with a 4 inch And some energy suspension bushings for the I beams and radius arms I’m a little scared to take my leaf springs out because the frame is twisted inward on both sides in the back from where the previous owner ripped the trailer hitch off on one hell of a stump if anyone has ever untwisted a frame and has a few pointers for me they’d be greatly appreciated, I also ripped the antique alpine stereo out and stock speakers and went back with some Memphis audio door speakers and two 6x8’s for behind the seat and I might get a kicker hide away sub if it’ll fit under the seat and I’d love to put the dash speaker back in what has everyone else done to their rigs ? Link to comment Share on other sites More sharing options...
Gary Lewis Posted June 14, 2021 Share Posted June 14, 2021 You've been busy! I don't have any guidance about bending the frame back out. I had to bend Big Blue's back in and that was accomplished with a whole lot of effort using a comealong, ratchet straps, chain, levers, etc. But out is a different story. Link to comment Share on other sites More sharing options...
Recommended Posts