StpaulF100 Posted April 30, 2021 Share Posted April 30, 2021 Picked up an 81 radio with mounting plate and all factory wiring today. Removed the non working aftermarket unit that was spliced into the truck. I am having a hard time finding the correct wiring to get it working. I have the yellow and blacked hashed wire and the blue with red that seemed to power the aftermarket unit. The Ford radio has both plugs still connected. Any guidance would be appreciated. I checked the Haynes Manuel and it was not clear on the radio wires and I checked the Link to comment Share on other sites More sharing options...
81f100custom Posted April 30, 2021 Share Posted April 30, 2021 Yellow/Black should be power and the Blue/Red should be for the light on the radio. Link to comment Share on other sites More sharing options...
StpaulF100 Posted April 30, 2021 Author Share Posted April 30, 2021 Yellow/Black should be power and the Blue/Red should be for the light on the radio. Do those splice into the blue and black on the radio? Or into the black white and red? Link to comment Share on other sites More sharing options...
81f100custom Posted April 30, 2021 Share Posted April 30, 2021 Do those splice into the blue and black on the radio? Or into the black white and red? These diagrams should be the colors on the radio if an oem and the colors they connect to. Link to comment Share on other sites More sharing options...
StpaulF100 Posted May 1, 2021 Author Share Posted May 1, 2021 These diagrams should be the colors on the radio if an oem and the colors they connect to. Thank you. I had to look at it on a real screen and not my phone. Looks like I need to get some bullet connectors and hook them up properly. I might have some trouble shooting on the speaker end but it looks promising. I’ll update when I have time to try it out. Link to comment Share on other sites More sharing options...
rcarlisle Posted May 1, 2021 Share Posted May 1, 2021 Thank you. I had to look at it on a real screen and not my phone. Looks like I need to get some bullet connectors and hook them up properly. I might have some trouble shooting on the speaker end but it looks promising. I’ll update when I have time to try it out. Here's a couple phots from when I had my 81 apart that might help. Speaker connector plug Radio connector plug Link to comment Share on other sites More sharing options...
StpaulF100 Posted May 1, 2021 Author Share Posted May 1, 2021 Here's a couple phots from when I had my 81 apart that might help. Speaker connector plug Radio connector plug Thanks randy. I have the factory plugs on the radio side and no plugs on the truck side. I have identified the correct power wires and it seems I’ll have to troubleshoot the speaker side. All I have is the 4 wires for the speakers. I’m assuming one color is for each side individually and the other completes the circuit. I’m going to dig around and see if can’t find the factory speaker wiring although i don’t think mine came factory with a radio. Those photos are just what I needed though so thanks again. Link to comment Share on other sites More sharing options...
rcarlisle Posted May 1, 2021 Share Posted May 1, 2021 Thanks randy. I have the factory plugs on the radio side and no plugs on the truck side. I have identified the correct power wires and it seems I’ll have to troubleshoot the speaker side. All I have is the 4 wires for the speakers. I’m assuming one color is for each side individually and the other completes the circuit. I’m going to dig around and see if can’t find the factory speaker wiring although i don’t think mine came factory with a radio. Those photos are just what I needed though so thanks again. Good luck. But maybe you'll find some writing in the dash at least. Mine has the wiring but it had been spliced into. Turns out it works. But when I had the dash pad off, I ran an extra set of wires for"just in case". They be there if I ever need them. And much thicker than the factory wiring. Factory wiring is never over engineered is it? Link to comment Share on other sites More sharing options...
StpaulF100 Posted May 4, 2021 Author Share Posted May 4, 2021 Good luck. But maybe you'll find some writing in the dash at least. Mine has the wiring but it had been spliced into. Turns out it works. But when I had the dash pad off, I ran an extra set of wires for"just in case". They be there if I ever need them. And much thicker than the factory wiring. Factory wiring is never over engineered is it? Radio is in and works on Fm like a charm. No Am but I rarely if ever tune into that anyway. Going to see if I have a tape or two laying around to see if the cassette works. Need to pick up the right bullet connectors tomorrow to button things up. Would not haveing an antenna attached cause problems with the am reception? Thanks for the diagrams and the pictures they were priceless. And to the nice gentleman from Craigslist who sold me the radio for a more then fair price. Link to comment Share on other sites More sharing options...
Gary Lewis Posted May 4, 2021 Share Posted May 4, 2021 Radio is in and works on Fm like a charm. No Am but I rarely if ever tune into that anyway. Going to see if I have a tape or two laying around to see if the cassette works. Need to pick up the right bullet connectors tomorrow to button things up. Would not haveing an antenna attached cause problems with the am reception? Thanks for the diagrams and the pictures they were priceless. And to the nice gentleman from Craigslist who sold me the radio for a more then fair price. Link to comment Share on other sites More sharing options...
Recommended Posts