kramttocs Posted March 31, 2021 Share Posted March 31, 2021 Door 2 completed. Now looking for the striker adjustment. And I'll have to get a proper torx. I have up to aT40 and that's too small. Doors stick out. Not even sure how to get this all adjusted, but I'm so happy it's quiet that I will be satisfied of I can get the strikers right. And I have no idea how to do that yet. Moving right along! With the door panel off you can access the bolt through the lock mechanism. Since your bolt is lined up enough to shut the door, shut it, and then reach through the door with the torx on an extension. Loosen it enough to move the door where you want it and the tighten down. Link to comment Share on other sites More sharing options...
rcarlisle Posted March 31, 2021 Author Share Posted March 31, 2021 Moving right along! With the door panel off you can access the bolt through the lock mechanism. Since your bolt is lined up enough to shut the door, shut it, and then reach through the door with the torx on an extension. Loosen it enough to move the door where you want it and the tighten down. Thanks. I'll give it a try. Tomorrow. Link to comment Share on other sites More sharing options...
Recommended Posts