JimJam300 Posted March 4, 2021 Share Posted March 4, 2021 I bought some aftermarket “wagon wheels” with no holes for mounting the small Ford hubcaps and I am just now realizing that. I know that it’s just as cut and dry as drilling and tapping but there is virtually no room for error and I’m not very good at metalworking. Has anyone tried doing this before successfully? Link to comment Share on other sites More sharing options...
rcarlisle Posted March 18, 2021 Share Posted March 18, 2021 Usually an aftermarket wagon wheel will have it's own style of center cap that just passes through the wheel with a slight lip on the back to hold it in place. And the ones that are flat in the middle won't have room for a screw to pass out the back side without causing issues with the wheel sitting flat on face of brake rotor/drum. If I'm reading everything correctly and remembering my wheels. Seems like a Ford wagon wheel is embossed around the lugs for the center caps to screw to? Link to comment Share on other sites More sharing options...
Recommended Posts