klancaster Posted March 3, 2021 Share Posted March 3, 2021 - deleted - Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 3, 2021 Share Posted March 3, 2021 Well, you did post in the right place, the New Members Start Here folder. But that isn't what I was expecting in an introduction "about yourself and your truck", as the email I sent you requested. So how about doing a bit more of an intro into the family? Then we can discuss the engine plate. Link to comment Share on other sites More sharing options...
klancaster Posted March 3, 2021 Author Share Posted March 3, 2021 Well, you did post in the right place, the New Members Start Here folder. But that isn't what I was expecting in an introduction "about yourself and your truck", as the email I sent you requested.So how about doing a bit more of an intro into the family? Then we can discuss the engine plate.Sorry. I have never been on a forum before. Any forum. Ever. The about me is just that. I have a 80 Ford and I look for parts when the need arises. On Wed, Mar 3, 2021 at 10:36 AM Gary Lewis [via Bullnose Enthusiasts Forum] <redacted_email_address> wrote: --Kevin Lancaster Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 3, 2021 Share Posted March 3, 2021 Well, I usually ask if the new member wants to be on our map (Bullnose Forum/Member's Map in the menu), and while I'm willing to add you it sounds like you are just in for a quick answer. So let's cut to the chase. Please go to our page at Documentation/Engines/300 Six and on the Illustrations tab scroll down to the 2nd picture. Is what you are looking for #7007? That is the generic part # for an "engine plate" for any Ford vehicle anywhere in the world. You need the full part number, which will be something like E0TZ 7007-A, but that probably isn't the right number. If so, then go to Documentation/Driveline/Engine Plates and find the full part number for the one you need. And then you can do a Google search for that part on the internet. And, in the Market Place/Want To Buy folder you could create a new thread/topic for what you are looking for. Link to comment Share on other sites More sharing options...
klancaster Posted March 3, 2021 Author Share Posted March 3, 2021 Well, I usually ask if the new member wants to be on our map (Bullnose Forum/Member's Map in the menu), and while I'm willing to add you it sounds like you are just in for a quick answer. So let's cut to the chase.Please go to our page at Documentation/Engines/300 Six and on the Illustrations tab scroll down to the 2nd picture. Is what you are looking for #7007? That is the generic part # for an "engine plate" for any Ford vehicle anywhere in the world. You need the full part number, which will be something like E0TZ 7007-A, but that probably isn't the right number.If so, then go to Documentation/Driveline/Engine Plates and find the full part number for the one you need. And then you can do a Google search for that part on the internet.And, in the Market Place/Want To Buy folder you could create a new thread/topic for what you are looking for.Thank you very muchOn a side note...Can you put me on your map?I am in Keller Texas On Wed, Mar 3, 2021 at 10:55 AM Gary Lewis [via Bullnose Enthusiasts Forum] <redacted_email_address> wrote: --Kevin Lancaster506 Santa Barbara Dr.Keller, TX 76248972-948-7160 Link to comment Share on other sites More sharing options...
Gary Lewis Posted March 3, 2021 Share Posted March 3, 2021 Sure thing, Kevin. You are now on the map. But I have a suggestion for you. It appears that you are posting by replying to the email. That works, but it copies in a whole bunch of junk from the previous post. And, worse yet, it is placing your phone number and street address out on the internet for the world to see. I've put a screenshot of what we are seeing of your posts, and circled both the extra stuff that doesn't need to be there as well as your address and phone number - which you do NOT want there. The better way to post is to click on the link under the phrase "If you reply to this email, your message will be added to the discussion below:" and that will log you on to the forum looking at that post. Then you can reply and there won't be the extra nor your detaills. Don't worry, we understand this is your first forum, so we'll work with you on this. Welcome to the family! Link to comment Share on other sites More sharing options...
grumpin Posted March 3, 2021 Share Posted March 3, 2021 Sure thing, Kevin. You are now on the map. But I have a suggestion for you. It appears that you are posting by replying to the email. That works, but it copies in a whole bunch of junk from the previous post. And, worse yet, it is placing your phone number and street address out on the internet for the world to see. I've put a screenshot of what we are seeing of your posts, and circled both the extra stuff that doesn't need to be there as well as your address and phone number - which you do NOT want there. The better way to post is to click on the link under the phrase "If you reply to this email, your message will be added to the discussion below:" and that will log you on to the forum looking at that post. Then you can reply and there won't be the extra nor your detaills. Don't worry, we understand this is your first forum, so we'll work with you on this. Welcome to the family! Welcome! Link to comment Share on other sites More sharing options...
Recommended Posts