old55pete Posted February 19, 2021 Share Posted February 19, 2021 Shaun, is this the bracket you are looking for? Link to comment Share on other sites More sharing options...
salans7 Posted February 19, 2021 Share Posted February 19, 2021 Shaun, is this the bracket you are looking for?http://forum.garysgaragemahal.com/file/n88997/DSCN0704.jpg Hi Steve, That looks like the one for the small block V8's. They look very similar, but are angled differently. Here is the one from Gary's 460: Link to comment Share on other sites More sharing options...
old55pete Posted February 19, 2021 Author Share Posted February 19, 2021 Shaun, is this the bracket you are looking for?http://forum.garysgaragemahal.com/file/n88997/DSCN0704.jpg Hi Steve, That looks like the one for the small block V8's. They look very similar, but are angled differently. Here is the one from Gary's 460: Ok, took that one off of a 460, 4V. I will look again and see if there is a bigger one Link to comment Share on other sites More sharing options...
salans7 Posted February 20, 2021 Share Posted February 20, 2021 Ok, took that one off of a 460, 4V. I will look again and see if there is a bigger one Really? I saw one posted for a 351W on Ebay and it looked just like yours? What year did you remove it from? According to the MPC listing below, there is a difference between 83-84 and 85-86 460 throttle brackets. Link to comment Share on other sites More sharing options...
81f100custom Posted February 20, 2021 Share Posted February 20, 2021 Really? I saw one posted for a 351W on Ebay and it looked just like yours? What year did you remove it from? According to the MPC listing below, there is a difference between 83-84 and 85-86 460 throttle brackets. I may need that bracket if its not the correct one for your application. Mine was originally a 255 V8 and someone put a 72 302 block in it before I ever got the truck and has always been like you see in the picture but would like to get it back more correct where the cable and spring are straight. With that said I would not know the one I need or even if any of the correct ones would work with my manifold. I do have access to the one on the 80 model truck but have not tried it yet. The one on the 80 model Link to comment Share on other sites More sharing options...
old55pete Posted February 20, 2021 Author Share Posted February 20, 2021 Shaun, is this the bracket you are looking for?http://forum.garysgaragemahal.com/file/n88997/DSCN0704.jpgHi Steve, That looks like the one for the small block V8's. They look very similar, but are angled differently. Here is the one from Gary's 460:Shaun, I am going back in a couple of days and will check out the other 460 trucks and see if they have the bracket like Gary's. I guess someone put this one from a small block on a 460 4V to get by or something. Steve -----Original Message-----From: salans7 [via Bullnose Enthusiasts Forum] <redacted_email_address>To: old55pete <redacted_email_address>Sent: Fri, Feb 19, 2021 2:58 pmSubject: Re: Throttle bracket Hi Steve, That looks like the one for the small block V8's. They look very similar, but are angled differently. Here is the one from Gary's 460: http://forum.garysgaragemahal.com/file/n89004/460_throttle_cable_bracket.jpg -Shaun (Florida resident, but not thy Florida Man)-1980ish Ford F350 Ranger XLT 4x4 460/T19/D60-10.25 Sterling-2003 Ford Ranger Edge 3.0 V6/M5OD/8.8-2002 Ford Ranger XLT 3.0 V6/5R44E/7.5Previously owned:-1980 Ford F150 Ranger Lariat 4x4 400/C6/D44-9"-2000 Ford Ranger Sport 2.5 I4/4R44E/7.5"I didn't choose the Ford Truck life, the Ford Truck life chose me." You have been tagged to come see this post.View message @ http://forum.garysgaragemahal.com/Throttle-bracket-tp88997p89004.htmlNAML Link to comment Share on other sites More sharing options...
old55pete Posted February 20, 2021 Author Share Posted February 20, 2021 Shaun, I got it off of an 83 F350 with duel rear wheels Link to comment Share on other sites More sharing options...
old55pete Posted February 20, 2021 Author Share Posted February 20, 2021 I may need that bracket if its not the correct one for your application. Mine was originally a 255 V8 and someone put a 72 302 block in it before I ever got the truck and has always been like you see in the picture but would like to get it back more correct where the cable and spring are straight. With that said I would not know the one I need or even if any of the correct ones would work with my manifold. I do have access to the one on the 80 model truck but have not tried it yet. The one on the 80 model Eddie, you are more then welcome to this one if Shaun cant use it, Just tell me where to send it Link to comment Share on other sites More sharing options...
salans7 Posted February 20, 2021 Share Posted February 20, 2021 Shaun, I got it off of an 83 F350 with duel rear wheels Then it should be the correct one. Weird how they're shaped differently between 83-84 and 85-86. Eddie, McDonald Obsolete Parts shows as having E0TZ-9728-C in stock. According to the MPC, that is the correct throttle cable bracket for a 1980 302. E1TZ-9728-C shows as the correct one for a 1981-1984 302. I am not sure of the difference. Nobody seems to have the 1981+ version in stock. The bracket shown here is E1TZ-9728-J, and only shows as being correct for a 460. My 460 is an 84, so technically this bracket is correct for my engine. Link to comment Share on other sites More sharing options...
old55pete Posted February 21, 2021 Author Share Posted February 21, 2021 Shaun, I got it off of an 83 F350 with duel rear wheels Then it should be the correct one. Weird how they're shaped differently between 83-84 and 85-86. Eddie, McDonald Obsolete Parts shows as having E0TZ-9728-C in stock. According to the MPC, that is the correct throttle cable bracket for a 1980 302. E1TZ-9728-C shows as the correct one for a 1981-1984 302. I am not sure of the difference. Nobody seems to have the 1981+ version in stock. The bracket shown here is E1TZ-9728-J, and only shows as being correct for a 460. My 460 is an 84, so technically this bracket is correct for my engine. I have to go back up there to get some other parts, I will look and see if there is an 85/86 and snag the bracket off of that one. It is really no big deal. If memory serves, your engine is in the machine shop so you dont need it tomorow Link to comment Share on other sites More sharing options...
Recommended Posts