85lebaront2 Posted January 22, 2021 Share Posted January 22, 2021 I'll take a look again tomorrow. Maybe I missed it. Gary, I am thinking that further back in that book the individual harnesses are shown and that may be where I remember the PNs for the connectors being. Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 22, 2021 Share Posted January 22, 2021 Gary, I am thinking that further back in that book the individual harnesses are shown and that may be where I remember the PNs for the connectors being. Thanks, Bill. I'll check it out in the morn. Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 22, 2021 Share Posted January 22, 2021 Thanks, Bill. I'll check it out in the morn. Bill - I've just gone through the '86 schematics and while there are LOTS of connector depictions just like I showed before, there is no table or anything else showing part numbers. I wish, but no go. Link to comment Share on other sites More sharing options...
85lebaront2 Posted January 22, 2021 Share Posted January 22, 2021 Bill - I've just gone through the '86 schematics and while there are LOTS of connector depictions just like I showed before, there is no table or anything else showing part numbers. I wish, but no go. Crap, probably buried somewhere in the MPC. Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 22, 2021 Share Posted January 22, 2021 Crap, probably buried somewhere in the MPC. Bill - My MPC is OCR'd, so I found them, or at least some of them. I need to see if I can cross reference your #'s, which I think are ID #'s, not part #'s, to these #'s. So here are your numbers: .060 female, Ford PN E7EB-14487-AA, Clips & Fasteners A18408 .060 male, Ford PN E7EB-14461-BA, AUVECO 20475 .110 female, Ford PN D1AB-14488-CA, Dorman 85356, AUVECO 14888 .110 male, Ford PN D1AB-14461-AA, Dorman 85345, AUVECO 14887 Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 23, 2021 Share Posted January 23, 2021 Bill - My MPC is OCR'd, so I found them, or at least some of them. I need to see if I can cross reference your #'s, which I think are ID #'s, not part #'s, to these #'s. So here are your numbers: .060 female, Ford PN E7EB-14487-AA, Clips & Fasteners A18408 .060 male, Ford PN E7EB-14461-BA, AUVECO 20475 .110 female, Ford PN D1AB-14488-CA, Dorman 85356, AUVECO 14888 .110 male, Ford PN D1AB-14461-AA, Dorman 85345, AUVECO 14887 I grabbed my 1980 cross-ref and the D1 #'s don't show, nothing that early. I'll have to get the later one and see if I can find the E7 #'s...... Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 23, 2021 Share Posted January 23, 2021 I grabbed my 1980 cross-ref and the D1 #'s don't show, nothing that early. I'll have to get the later one and see if I can find the E7 #'s...... I found # E7EB 14487-AA as PN E6DZ 14487-A, but I can't find any of the others. Link to comment Share on other sites More sharing options...
Rusty_S85 Posted January 23, 2021 Share Posted January 23, 2021 I found # E7EB 14487-AA as PN E6DZ 14487-A, but I can't find any of the others. Looked on Ebay no E6DZ but there is listings for the E7EB female pins 0.060" pins listed as 18-20Ga. Need to take and get a new wordpad document going for my truck folder on my external hard drive and start working on this. I need to hit up amazon as well and see if I can pick up two of those fuse boxes I am looking at. Recently made a discovery about them that I will be updating my Sniper Post with. Link to comment Share on other sites More sharing options...
85lebaront2 Posted January 23, 2021 Share Posted January 23, 2021 Bill - My MPC is OCR'd, so I found them, or at least some of them. I need to see if I can cross reference your #'s, which I think are ID #'s, not part #'s, to these #'s. So here are your numbers: .060 female, Ford PN E7EB-14487-AA, Clips & Fasteners A18408 .060 male, Ford PN E7EB-14461-BA, AUVECO 20475 .110 female, Ford PN D1AB-14488-CA, Dorman 85356, AUVECO 14888 .110 male, Ford PN D1AB-14461-AA, Dorman 85345, AUVECO 14887 Gary, those PNs are from the sources I get the parts from. Go to Dorman's site, AUVECO or Clips & Fasteners and plug in the PNs I gave for those sources. Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 24, 2021 Share Posted January 24, 2021 Gary, those PNs are from the sources I get the parts from. Go to Dorman's site, AUVECO or Clips & Fasteners and plug in the PNs I gave for those sources. Bill - I added some tabs to the page at Documentation/Electrical/Connectors. I'm not too pleased with it so I know there need to be changes. But please take a look and tell me what to change. Link to comment Share on other sites More sharing options...
Recommended Posts