Gary Lewis Posted January 12, 2021 Author Share Posted January 12, 2021 Look at the plug, it probably does not have a contact in that location. I'll check it out tomorrow. But I'll bet it does as they'll want to ensure that the BOO signal cancels things. Link to comment Share on other sites More sharing options...
Gary Lewis Posted January 12, 2021 Author Share Posted January 12, 2021 Look at the plug, it probably does not have a contact in that location. Bingo! I checked two harnii and neither have a wire in the pin that the later one says is the Engage Light. Good call, Bill. Link to comment Share on other sites More sharing options...
85lebaront2 Posted January 13, 2021 Share Posted January 13, 2021 Look at the plug, it probably does not have a contact in that location. Bingo! I checked two harnii and neither have a wire in the pin that the later one says is the Engage Light. Good call, Bill. Now you just need to see if it is a +12v feed or grounds when engaged, then you can add to your bevy of information sources when driving (it will let you know if it doesn't cancel on clutch release). Link to comment Share on other sites More sharing options...
Recommended Posts