Snowpony Posted October 21, 2020 Share Posted October 21, 2020 Greetings, I know I'm technically new here, only registering finally today, I've been using this resource for the last few years. What a great resource! About me, married, 2 daughters, 2 Broncos, and I live in West Michigan. My current Broncos are a1984 and a 1985. Living in Michigan,we get snow. And they salt the roads. Finding rust free parts is like hitting the lottery! Always looking for good stuff, and fixing the stuff I have. My 1985 has a snowplow on it. I did put a straight axle under her,and the short wheelbase makes plowing right areas easy. Thanks for this opportunity, Curt Link to comment Share on other sites More sharing options...
kramttocs Posted October 21, 2020 Share Posted October 21, 2020 Welcome! Glad you joined and looking forward to seeing your Broncos. Don't know if I've seen a Bronco with a plow on it before Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 21, 2020 Share Posted October 21, 2020 Welcome, Curt! Glad you joined. (And glad you finally got in. That Yahoo thing is a bummer.) Where in West Michigan are you? If we had a town or zip we could put you on the map. (Bullnose Forum/Member's Map in the menu.) Two Broncos!?!?!? That's not fair! I don't have any. Seriously though, we need to see pics as we are wont to say "Pics or it didn't happen." What do you do? Me, I'm retired and loving it! Link to comment Share on other sites More sharing options...
1986F150Six Posted October 21, 2020 Share Posted October 21, 2020 Welcome, Curt! Glad you joined. (And glad you finally got in. That Yahoo thing is a bummer.) Where in West Michigan are you? If we had a town or zip we could put you on the map. (Bullnose Forum/Member's Map in the menu.) Two Broncos!?!?!? That's not fair! I don't have any. Seriously though, we need to see pics as we are wont to say "Pics or it didn't happen." What do you do? Me, I'm retired and loving it! Welcome, Curt! Link to comment Share on other sites More sharing options...
Snowpony Posted October 21, 2020 Author Share Posted October 21, 2020 Welcome, Curt! Glad you joined. (And glad you finally got in. That Yahoo thing is a bummer.) Where in West Michigan are you? If we had a town or zip we could put you on the map. (Bullnose Forum/Member's Map in the menu.) Two Broncos!?!?!? That's not fair! I don't have any. Seriously though, we need to see pics as we are wont to say "Pics or it didn't happen." What do you do? Me, I'm retired and loving it! Gary, I'm in Battle Creek,Michigan.49017. I work as a printer, making flexible packaging, food wrappers for almost everything. Yes 2 Broncos! 4 extra doors,1 extra top,misc stuff I may need someday? Pictures, I will try! Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 21, 2020 Share Posted October 21, 2020 Gary, I'm in Battle Creek,Michigan.49017. I work as a printer, making flexible packaging, food wrappers for almost everything. Yes 2 Broncos! 4 extra doors,1 extra top,misc stuff I may need someday? Pictures, I will try! Interesting! A "printer" makes flexible packaging. I didn't know that. Anyway, you are now on the map. As for your pic, you've run afoul of the problems in posting pics on this, and many forums. The issue is that when you take a pic with a modern camera you can rotate it any which way and it'll put an orientation stamp in the picture's metadata. Then when modern devices open the pic they read the data and properly orient the pic. Not so our forum, although I hope to change that some day. So, for now you have to open it in an editing app and then save it. That usually gets it to the proper orientation. And, your file might have been over the 1 Mb upper size limit, so you made it Big or Small or somesuch. That takes detail out. So when I rotated and zoomed your pic it got fuzzy. Sorry. When you open and then save your file in the editing app tell it to save to a size smaller than the 1 Mb limit. Link to comment Share on other sites More sharing options...
Snowpony Posted October 21, 2020 Author Share Posted October 21, 2020 Interesting! A "printer" makes flexible packaging. I didn't know that. Anyway, you are now on the map. As for your pic, you've run afoul of the problems in posting pics on this, and many forums. The issue is that when you take a pic with a modern camera you can rotate it any which way and it'll put an orientation stamp in the picture's metadata. Then when modern devices open the pic they read the data and properly orient the pic. Not so our forum, although I hope to change that some day. So, for now you have to open it in an editing app and then save it. That usually gets it to the proper orientation. And, your file might have been over the 1 Mb upper size limit, so you made it Big or Small or somesuch. That takes detail out. So when I rotated and zoomed your pic it got fuzzy. Sorry. When you open and then save your file in the editing app tell it to save to a size smaller than the 1 Mb limit. "50%" style="transform:rotate(180deg); /> Yeah, technology got me again! Thanks for flipping it, I was reading what to do about it. Got more pictures, no promises on which way I end up posting them? Curt Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 21, 2020 Share Posted October 21, 2020 Yeah, technology got me again! Thanks for flipping it, I was reading what to do about it. Got more pictures, no promises on which way I end up posting them? Curt Are on a computer or a mobile device? On a Windows machine there are several free apps to use. On an iPhone I've used Photoshop Express. Link to comment Share on other sites More sharing options...
Snowpony Posted October 21, 2020 Author Share Posted October 21, 2020 Are on a computer or a mobile device? On a Windows machine there are several free apps to use. On an iPhone I've used Photoshop Express. My garage, Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 21, 2020 Share Posted October 21, 2020 My garage, Looking good! And, you got the picture posting figured out. Link to comment Share on other sites More sharing options...
Recommended Posts