salans7 Posted October 14, 2020 Author Share Posted October 14, 2020 Dan - I do think there are gussets that angle back, but I didn't have them and just used the original ones. Bill - I used the E4OD crossmember and gussets I got off Huck, the 1990 half-truck, on Dad's truck, and it all fit fine once I drilled the holes in the right place. Gary, stop teasing me with that crossmember. Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 14, 2020 Share Posted October 14, 2020 Gary, stop teasing me with that crossmember. Sorry, Shaun. Link to comment Share on other sites More sharing options...
salans7 Posted October 14, 2020 Author Share Posted October 14, 2020 Sorry, Shaun. Here's the reasoning for my thread, this is straight from my 1980 Body/Chassis/Electrical manual. No idea why the number is shown as 5060 here. Link to comment Share on other sites More sharing options...
85lebaront2 Posted October 14, 2020 Share Posted October 14, 2020 Gary, stop teasing me with that crossmember. http://www.garysgaragemahal.com/uploads/6/5/8/7/65879365/laughing-25-x-25_orig.gif Ok, Shaun, how about this one? I think it came from a 1994 F250. Link to comment Share on other sites More sharing options...
1986F150Six Posted October 14, 2020 Share Posted October 14, 2020 Ok, Shaun, how about this one? I think it came from a 1994 F250. Is this the same, Bill? https://www.ebay.com/itm/Cross-Member-Transmission-1990-1994-Bracket-NEW-TO-OEM-F4TA-LA/223818629417?fits=Model%3AF-250&hash=item341ca14129:g:bQkAAOSwAGxeBi4T Link to comment Share on other sites More sharing options...
salans7 Posted October 14, 2020 Author Share Posted October 14, 2020 Ok, Shaun, how about this one? I think it came from a 1994 F250. That's not the crossmember I'm looking for, so no dice. Link to comment Share on other sites More sharing options...
Dan Crowley Posted October 14, 2020 Share Posted October 14, 2020 Dan - I do think there are gussets that angle back, but I didn't have them and just used the original ones. Bill - I used the E4OD crossmember and gussets I got off Huck, the 1990 half-truck, on Dad's truck, and it all fit fine once I drilled the holes in the right place. Hi Gary, Thank you, I'll see if I can find some. Dan Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 14, 2020 Share Posted October 14, 2020 Here's the reasoning for my thread, this is straight from my 1980 Body/Chassis/Electrical manual. No idea why the number is shown as 5060 here. Shaun - That's bizarre! Why would the FSM and the MPC have different numbers? Link to comment Share on other sites More sharing options...
salans7 Posted October 14, 2020 Author Share Posted October 14, 2020 Shaun - That's bizarre! Why would the FSM and the MPC have different numbers? I went through each manual transmission section and they're all like that, same number. Even the gussets have the wrong number, they start with 7's. Definitely odd. Link to comment Share on other sites More sharing options...
85lebaront2 Posted October 15, 2020 Share Posted October 15, 2020 Is this the same, Bill? https://www.ebay.com/itm/Cross-Member-Transmission-1990-1994-Bracket-NEW-TO-OEM-F4TA-LA/223818629417?fits=Model%3AF-250&hash=item341ca14129:g:bQkAAOSwAGxeBi4T No, mine has a dip for the dual headpipes and an almost vertical gusset on the right side as a result. Link to comment Share on other sites More sharing options...
Recommended Posts