Ford F834 Posted September 30, 2020 Share Posted September 30, 2020 Gary let me look... I probably have some broken ones that could hitch a ride with the grab handles.... They often break at the screw hole, so am I getting this right that you need one with that section intact? Also, would it matter if it was a brick or Aeronose trim piece for your purposes? Does it matter if it is right or left side? Or do you need both? Link to comment Share on other sites More sharing options...
86 12 Brutus Posted September 30, 2020 Share Posted September 30, 2020 Gary let me look... I probably have some broken ones that could hitch a ride with the grab handles.... They often break at the screw hole, so am I getting this right that you need one with that section intact? Also, would it matter if it was a brick or Aeronose trim piece for your purposes? Does it matter if it is right or left side? Or do you need both? Gary, let me check, i think we had to take the ones out of the parts truck for Brutus, i seam to remember his were cracked, but we still have them. Ill let you know. you can have them if we still have them. Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 30, 2020 Author Share Posted September 30, 2020 Gary let me look... I probably have some broken ones that could hitch a ride with the grab handles.... They often break at the screw hole, so am I getting this right that you need one with that section intact? Also, would it matter if it was a brick or Aeronose trim piece for your purposes? Does it matter if it is right or left side? Or do you need both? George - Thanks a bunch. But Jonathan is already shipping me some grab handles, so if he has broken trim that would make it easier and less expensive. If he doesn't, I'll be back to you. Jonathan - If you have Bullnose trim that would be the best. I say that because someone, and I think it was Shaun, said the other day that the middle hole is in a different place for Bull vs Brick. But if I misunderstood that perhaps I could use a later one - if it has the same shape. And side doesn't matter at all. It is ok if it is cracked at the middle hole. Or if broken completely there if I can glue it back together. I just want to be able to use the screw hole to register the thing properly on the pillar. In fact, if it is broken at the hole then that makes it even easier to fit in the box with the handles. And shipping it with the grab handles would be perfect. If the trim were cut down so I had maybe 6" above and below the middle hole that would suffice. I want to be able to see how much metal I can get in the areas above and below the hole, so need to be able to look in there. Thanks! Link to comment Share on other sites More sharing options...
1986F150Six Posted September 30, 2020 Share Posted September 30, 2020 I may have the original red ones from Darth or maybe some later ones which match the A pillar, just the tops are different you are welcome to them for cutting and fitting purposes. And while we are on interior trim, I misplaced the right rear piece over the door from the 1996 opal gray interior I put in Darth. If someone comes across a crew cab in a junk yard with opal gray interior I could use that, actually any 1992-96/7 and maybe earlier will work as I have the SEM opal gray paint. https://www.ebay.com/itm/1983-1997-FORD-F350-PICKUP-CREW-CAB-REAR-RIGHT-DOOR-UPPER-TRIM-MOLDING-OEM156900/333725200039?fits=Year%3A1992%7CMake%3AFord&_trkparms=ispr%3D1&hash=item4db3926ea7:g:GosAAOSwdP9fY918&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkCrLl8erj3ATP5raQxjc%252F%252By70Lw3C4GIbAnmES0t4NKZPKu8w2WAkpe7aFzI15A9Wuaz5dL7NmtZkyTYsMbmETFUfkkJK5S0c1LxwZvHxNOsVR%252FirSv4VUU%252F065uSO2wTB905jDljtzay14h%252BHIydE%252FmkUMsUkeKS8n%252FluEm6MdI%252F0LDQ9cgDJZtwHK6iZnlPlG37siotswZxzeHIimmVNAuibWX6ZHoQ1fwerHeaFpt7rBrmZzFQAVt%252BmbJsuKXEN72J5HhJmCKvjLHFiJ66T3LlFMGyhFx1RlqCqfJoQ4a8sAiPELznJqMOYFKIHVJ8HWpuvBR%252BRnomCaC3jjP0RZIpAWLTTmb19o3Jn4xYTguLZjAmuAS%252Fo619AguhQSVbxu5WJAMUgairUPjyZG4wgK1WY1sxW9NJ5DfCGVw6ZoLCwchSn5H9Fj%252BdarW%252BCeWI75n628hcuPVX1OEtfEzbaqhCXHkUvghL9ZQQ%252FDnITENzBTy0GLUwdY0BlpwErFmEb6r3KcNl3NlAA%252B5rw7un9dLjxgjXJ2yCzpAiYviqG0om9YX18p0JSMCMALVe9IicnHdZ6Yb7cuAzDoQAf5jmcG7763GaIhO0f7xCOYnfyeehdGpbzq0Y8EsJpgGakeCrQstQab0FvGCFkPL1OZBihjb2Wb%252BZOErQC3DJRb1CRSQCE6A2%252BYgictlJCVv8Jgfr5MQPn7SHekbKXbRlbEVP7RYmPSje8sitiM109EG%252B4Qo%252B%252FbR2jtMl3ydxhai6Kc6JEePSao1vrFZzfWh1GaAoJQ%253D%253D%7Ccksum%3A3337252000398257ea6993f447cfb2b93251458f6648%7Campid%3APL_CLK%7Cclp%3A2334524 https://www.ebay.com/itm/1983-1997-FORD-F350-PICKUP-CREW-CAB-DOOR-UPPER-TRIM-MOLDING-REAR-PASSNGR-FACTORY/363125184944?fits=Year%3A1992%7CMake%3AFord&hash=item548bf299b0:g:Lj8AAOSwbWlfdG1g https://www.ebay.com/itm/92-97-Ford-F-250-350-Crew-Cab-Rear-Door-Cab-Trim-Panel-Molding-Left-Headliner-OE/254330195700?fits=Year%3A1992%7CMake%3AFord&hash=item3b3742cef4:g:14cAAOSwBbBdU5pd Not what you are seeking, but just in case needed: https://www.ebay.com/itm/92-96-FORD-F250-97-F350-CREW-CAB-REAR-CORNER-C-PILLAR-TRIM-MOULDINGS-GRAY-OEM/223973611318?hash=item3425de1736:g:ORsAAOSwW2tekM0Q Link to comment Share on other sites More sharing options...
Gary Lewis Posted September 30, 2020 Author Share Posted September 30, 2020 I may have the original red ones from Darth or maybe some later ones which match the A pillar, just the tops are different you are welcome to them for cutting and fitting purposes. And while we are on interior trim, I misplaced the right rear piece over the door from the 1996 opal gray interior I put in Darth. If someone comes across a crew cab in a junk yard with opal gray interior I could use that, actually any 1992-96/7 and maybe earlier will work as I have the SEM opal gray paint. https://www.ebay.com/itm/1983-1997-FORD-F350-PICKUP-CREW-CAB-REAR-RIGHT-DOOR-UPPER-TRIM-MOLDING-OEM156900/333725200039?fits=Year%3A1992%7CMake%3AFord&_trkparms=ispr%3D1&hash=item4db3926ea7:g:GosAAOSwdP9fY918&amdata=enc%3AAQAFAAACcBaobrjLl8XobRIiIML1V4Imu%252Fn%252BzU5L90Z278x5ickkCrLl8erj3ATP5raQxjc%252F%252By70Lw3C4GIbAnmES0t4NKZPKu8w2WAkpe7aFzI15A9Wuaz5dL7NmtZkyTYsMbmETFUfkkJK5S0c1LxwZvHxNOsVR%252FirSv4VUU%252F065uSO2wTB905jDljtzay14h%252BHIydE%252FmkUMsUkeKS8n%252FluEm6MdI%252F0LDQ9cgDJZtwHK6iZnlPlG37siotswZxzeHIimmVNAuibWX6ZHoQ1fwerHeaFpt7rBrmZzFQAVt%252BmbJsuKXEN72J5HhJmCKvjLHFiJ66T3LlFMGyhFx1RlqCqfJoQ4a8sAiPELznJqMOYFKIHVJ8HWpuvBR%252BRnomCaC3jjP0RZIpAWLTTmb19o3Jn4xYTguLZjAmuAS%252Fo619AguhQSVbxu5WJAMUgairUPjyZG4wgK1WY1sxW9NJ5DfCGVw6ZoLCwchSn5H9Fj%252BdarW%252BCeWI75n628hcuPVX1OEtfEzbaqhCXHkUvghL9ZQQ%252FDnITENzBTy0GLUwdY0BlpwErFmEb6r3KcNl3NlAA%252B5rw7un9dLjxgjXJ2yCzpAiYviqG0om9YX18p0JSMCMALVe9IicnHdZ6Yb7cuAzDoQAf5jmcG7763GaIhO0f7xCOYnfyeehdGpbzq0Y8EsJpgGakeCrQstQab0FvGCFkPL1OZBihjb2Wb%252BZOErQC3DJRb1CRSQCE6A2%252BYgictlJCVv8Jgfr5MQPn7SHekbKXbRlbEVP7RYmPSje8sitiM109EG%252B4Qo%252B%252FbR2jtMl3ydxhai6Kc6JEePSao1vrFZzfWh1GaAoJQ%253D%253D%7Ccksum%3A3337252000398257ea6993f447cfb2b93251458f6648%7Campid%3APL_CLK%7Cclp%3A2334524 https://www.ebay.com/itm/1983-1997-FORD-F350-PICKUP-CREW-CAB-DOOR-UPPER-TRIM-MOLDING-REAR-PASSNGR-FACTORY/363125184944?fits=Year%3A1992%7CMake%3AFord&hash=item548bf299b0:g:Lj8AAOSwbWlfdG1g https://www.ebay.com/itm/92-97-Ford-F-250-350-Crew-Cab-Rear-Door-Cab-Trim-Panel-Molding-Left-Headliner-OE/254330195700?fits=Year%3A1992%7CMake%3AFord&hash=item3b3742cef4:g:14cAAOSwBbBdU5pd Not what you are seeking, but just in case needed: https://www.ebay.com/itm/92-96-FORD-F250-97-F350-CREW-CAB-REAR-CORNER-C-PILLAR-TRIM-MOULDINGS-GRAY-OEM/223973611318?hash=item3425de1736:g:ORsAAOSwW2tekM0Q Well, Bill. There you go! Thanks, David. Link to comment Share on other sites More sharing options...
Ford F834 Posted October 3, 2020 Share Posted October 3, 2020 Well, Bill. There you go! Thanks, David. Gary, I will have you covered on an A pillar trim to experiment on, but I need a couple more days to get everything packaged and mailed out. I just thought I should post an update here so folks know you have a line on one 🙂 Link to comment Share on other sites More sharing options...
Gary Lewis Posted October 4, 2020 Author Share Posted October 4, 2020 Gary, I will have you covered on an A pillar trim to experiment on, but I need a couple more days to get everything packaged and mailed out. I just thought I should post an update here so folks know you have a line on one 🙂 Jonathan - PLEASE take lots of time. As you know, I'm taking some time off, and even when I get back to it I won't be in any hurry. You have more important things to do! Link to comment Share on other sites More sharing options...
Recommended Posts